Hey guys.. Well here is the deal... I bought my old car back and thinking about other vehicular options.. Here is the low down.. The car needs a LOT of little things somehow once it left my possession it was not cared for the way i took care of it!! I love the car and it's coming off the road next week (vacation from work) and I will be redoing the body and the paint and fixing the other odds and ends over the winter and will enjoy it next year.. However if a reasonable offer sparks my eye I will sell it before I put all this time into it.. (my labor isn't free not even to myself lol)
Body and Exterior
So other than the fact that whoever originally cut holes for the stupid fender vents didn't paint the bare metal it rotted the fenders.. The rest of the car is solid and rust free (doors, floors etc) there is a small bubble of surface under the drivers 1/4) The nose panel is FUBARed and the front bumper needs fiberglass repair from bottoming out too much (i didn't do this)
-White paint with House of Kolors Blue Ice Pearl (needs repaint!)
-M3 Rep Mirrors
-M.A. Shaw 10lb E46 style front Bumper
-Reiger rear Bumper
-M3 door mouldings
-E46 style fender vents (drivers side now missing.. again not me)
-Blue Halo headlights
-Smoked Taillights (pass side lense is cracked)
-4 point Roll Cage
-Black and white custom Leather interior (front seats are shot)
-M3 stainless door sills
-AC Shnitzer dead pedal
-Reverse Glow Gauges
-UUC shift knob
- 2.5L DOHC VANOS 75k miles on drivetrain.
- ShitRag Trans.
- Bosh Iridium Plugs
- Aluminum T-stat housing
- Cooling fan & AC delete
- 10lb Aluminum Flywheel
- SACH Stage II clutch
- Turner Motorsport Headers
- 2.5” exhaust with Dynomax muffler (NO CAT)
- Jim Conforti racing chip
- UUC short shifter
- 3:91 LSD rear end
- Jim Confori CAI
- UnderDrive Pullies
- AmSoil 10w30 turbo approved fully synthetic oil Only.
-Tokico 5 way adjustable shocks and struts
-Tokico lowering springs
-Turner Motorsports Adjustable sway bars front and rear
-Strut braces front and rear
-Turner Motorsports Weld in subframe plates
-Poly Urathane bushings throughout
-UUC solid Tans bushings
-Solid Durlin offset lower control arm bushings
-Stainless steel brake lines
-Brembo cross drilled rotors front and rear
-Bendix ceramic brake pads
-DOT-5 brake fluid (Just flushed!)
-Will come with BOTTLECAPS with tires that hold air! w00tw00t!
Mechanically the car runs solid.. But needs all the little things.. 2 fenders, nose panel repair front bumper and paint! Seats, windshield, catalytic to pass emissions..
Great car if you want to built it back up or strip the parts off for yourself
I AM NOT PARTING THE CAR!!!!! I will be considering offers in the $3500 range AS IS otherwise I will just keep it.. I am not a motivated seller.. You need to be a motivated buyer.
I will get more pics later.. Best I have for now.. NOTE: THE SEATS DO NOT look that good anymore!!