Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > General > Track Junkies
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-19-2001, 10:38 AM   #1
GR8 Ride
5th Gear Member
 
GR8 Ride's Avatar
 
Join Date: Dec 2001
Location: Brampton
Posts: 948
Send a message via ICQ to GR8 Ride
Negative camber...

Rob,

There are a couple of things to consider with negative camber.

It will help your cornering ability at high speeds, however it result in increased tire wear at city driving speeds. The nice thing about adjustable camber plates is that you can easily change from -3 deg to -1.5 degrees without too much difficulty.

It will mostly help tire wear on the track, as the outside edge (typically the left front is the primary concern) will get the most use. If you can spread the wear across the tire, they'll generally last longer.

Too much negative camber is a bad thing on the streets; one, your inside edge of each tire will wear out quickly. Two, your car will tend to hunt and dart through each ridge in the road; basically, the ride will really suck.

And yes, negative camber should be on both the front and rear wheels.


Pat
__________________
.
I'm not really an asshole, I just play one on the Internet
__________________
GR8 Ride is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.