Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > General > General Discussion
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-29-2010, 09:03 PM   #1
Nick_V
6th Gear Member
 
Nick_V's Avatar
 
Join Date: Feb 2009
Location: Hamilton
Posts: 1,272
2 Questions about 3M trim tape

1. Has anyone used it? I'm talking about the two sided tape with foam in between. The car in question has had bodywork done and I'm having a helluva time getting the door moldings to fit properly with the stock clips. Does it work well and how durable is it?

2. Where can I buy it?

Thanks,

-Nick
Nick_V is online now   Reply With Quote
Old 11-29-2010, 09:58 PM   #2
325isdan
5th Gear Member
 
Join Date: Jun 2007
Location: GTA
Posts: 1,104
I used some but it was exposed to weather. Held all of two minutes after it got wet.
325isdan is online now   Reply With Quote
Old 11-29-2010, 10:54 PM   #3
simplycars
6th Gear Member
 
simplycars's Avatar
 
Join Date: Nov 2008
Location: Oakville / Mississauga
Posts: 1,592
automotive 3m tape will work - try napa or carquest
__________________
simplycars is offline   Reply With Quote
Old 11-30-2010, 02:10 PM   #4
propr'one
op sucks cock
 
propr'one's Avatar
 
Join Date: Jun 2004
Location: T.
Posts: 17,701
Send a message via MSN to propr'one
have you tried getting new clips and nipples?
__________________
d1s bulb canada

Hot: 2001 Estoril M RoadsterZCP 19's michelin supersports, ZHP knob, JL 8W3
Cold: 2002 TiAg M3 6mt ZCP 19's michelin supersports, deoranged, dechromed, led tails, ZHP knob, UUC SS v3, GROM, OEM 18's w310's,
hid headlights hid kit
propr'one is offline   Reply With Quote
Old 11-30-2010, 03:31 PM   #5
Nick_V
6th Gear Member
 
Nick_V's Avatar
 
Join Date: Feb 2009
Location: Hamilton
Posts: 1,272
^^I got DDM M3 moldings brand new. I heard mixed reviews about quality but thought what the Hell, they're cheap enough. One side fits perfectly but on the other side, as I mentioned, there has been bodywork done in the past. I can tell because you can see the cheese under the paint at the edges of the holes. The work done is far from a hack job, but it's kinda like taping drywall - you can't tell visually, but the presence of cheese raises the overall depth of the groove in which the clips sit just enough that they won't snap in like they're supposed to in some spots. Know what I mean?

I thought of possibly grinding down parts of the molding itself to allow it to come closer to the body, but it's probably just easier to use the tape. I found a few places that have it, but would still like to hear some reviews if anyone has experience with it
Nick_V is online now   Reply With Quote
Old 11-30-2010, 03:48 PM   #6
BSL
2nd Gear Member
 
BSL's Avatar
 
Join Date: May 2008
Location: ptbo
Posts: 210
It works really nicely.
The key is getting the surface clean clean clean first.
Use 440 solvent, or isoproyl alcohol. Keep wiping the area with a clean rag, until no dirt shows on the rag.
Do both mating surfaces, make sure its dry
Whatever you stick on will never come off.
BSL is offline   Reply With Quote
Old 11-30-2010, 03:59 PM   #7
slemmer
Driving in the fast lane
 
slemmer's Avatar
 
Join Date: Dec 2002
Location: Missed in 'sauga
Posts: 2,991
You're referring to the 3M red automotive tape, right? Make sure you apply heat to activate the adhesive and rub it down good so it can bond the two surfaces.
__________________

'04 645cic
'05 GMC Sierra SLT Z71 CCSB 4x4
'02 Regal LS
'00 740i Sport
slemmer is offline   Reply With Quote
Old 11-30-2010, 10:39 PM   #8
zarbat007
3rd Gear Member
 
Join Date: Feb 2007
Location: Ottawa
Posts: 370
This should work:


http://www.autogeek.net/3m-auto-tape.html
zarbat007 is offline   Reply With Quote
Old 12-01-2010, 12:45 AM   #9
Nick_V
6th Gear Member
 
Nick_V's Avatar
 
Join Date: Feb 2009
Location: Hamilton
Posts: 1,272
Thanks guys, gonna pick some up and give it a shot.
Nick_V is online now   Reply With Quote
Old 12-01-2010, 01:39 PM   #10
///Maluco
5erholic
 
///Maluco's Avatar
 
Join Date: Dec 2004
Location: North York
Posts: 1,383
When you apply the tape (grey foam tape with red liner), make sure the ambient temperature is between 16-30 degrees C. That's the optimum temperature range for excellent tape adhesion.
Before applying tape to the moldings, apply some 3M primer (adhesion promoter) and let dry before you roll on the tape.
As mentioned, you need to also clean any dirt/grime/wax/grease from the mating panels on your car. Isoproyl alcohol works very well.
Remember, preperation is key.
__________________
..........................There will always be followers!

Bimmer Mag......................October 2010.....................Issue No. 93
///Maluco is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:19 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.