Will 19x9 Fit

TYE · 01-14-2002, 09:52 PM

On a 95 325IS, will a 19x9 offset et38 fit? The question is in the front? I am running -2 degrees camber all around.

AzN_E46 · 01-14-2002, 11:15 PM

the guys here can't say a sh*t after seeing your girl in your sig....LOL

i cant help you....

probably cuz im only 13 in may.

AzN_E46 · 01-14-2002, 11:16 PM

o and i think 18s would be better suited to a 325.

***Bliss*** · 01-14-2002, 11:30 PM

The 19" i beleive will fit, but the width of 9 will give you trouble. I think the max you can go is 8.5 esp when its in the front too.

SJTrance · 01-15-2002, 02:07 AM

Yeah, if possible, I'd do the 8.5 in the front and the 9 in the rear. You could run the staggared tires anyway. you see, your main problem would be that your tires would have a tought time fitting. You really can't run more than 235 in the front comfortably anyway. So, you're gonna end up haveing a tire and rim not fitting perfectly. Infact, that is the case with my 8.5 HMII's and my 225 tires. The tire isn't perfectly flush and it provides no rim protection.

**EMPOWERD** · 01-15-2002, 12:49 PM

Tye,

What's Dado running on his E36? I know he has 19's and I think I remember him telling me they're the same all around. I know for a fact that his fenders are all rolled.

AzN_E46 · 01-15-2002, 06:00 PM

they dont look rolled to me

at least in the pics.

azn330i · 01-15-2002, 06:32 PM

Dado has 235 tires on his car with 19" x 9.5 PG2s all around
and yea i didn't know his fenders were rolled

azn330i · 01-15-2002, 06:34 PM

dammit........sorry they were 19" x 8.5 rims

***Bliss*** · 01-15-2002, 07:37 PM

Dado had a lot more done to his fenders than just rolling..so i've heard.

TYE · 01-15-2002, 08:09 PM

Yes, he has a lot of fenderwork. As to why I don't just run 18s on a 325, this car is only a 325 in name, it will hand any modded 325 its ass. As for the 8.5 width, I have 18x8.5 right now and want to upgrade to 19s, and the ones I want are 19x9. I'll let you know how it goes as I am test fitting them tonight.