Looking for part of a harness
I need part of a harness for my 1990 325i engine. It is the 'underdash' to 'engine' harness *connector*. Basically I think the harness from inside the car comes through the firewall...and then it plugs into the harness from the engine. Its a big round plug, about 2 or 2.5 inches in diamter. It says AMP on it with some numbers. I'll try to find a digicam to take a picture of hte 'engine' side.
I'll need the connector and about 6 inches (or more!) of wire that come out of it. So basically it could be cut off a wreck..right at the firewall, after pulling it out a bit.
Matt in Winnipeg
'72 02/m20 powered...almost..