Gold Gas for 69.9 at Shell On Thomas and Erin - Page 2

///MsAniTy · 02-10-2004, 01:22 AM

well do u kno where i can possibly get that and how much is it?

BMW BMXer · 02-10-2004, 01:51 AM

Mark I dont have a chip in my eta but I plan to get one form you at some point.

Mitch555 · 02-10-2004, 01:59 AM

Quote:

Originally posted by MarkD
Roughly 4 more hp with 93 octane, the dyno will be running by then so I can tell you then.

The chip does not read that you have M3 cams, I have to program the fuel map differently and yes I can do that.

Your mileage should increase with a chip. That's a good reason to get it this month!

MarkD

You mean my mileage will become better with the chip right?

So the chip should give my car an extra how many HP to be exact?

MarkD · 02-10-2004, 02:06 AM

Quote:

Originally posted by Mitch555
You mean my mileage will become better with the chip right?

So the chip should give my car an extra how many HP to be exact?

Yes the chip should increase your mileage, and in your car you should see a 13 hp improvement. SanJ and a few others have my chip in their 320i's, ask them how they like it.

If 3 or more of you 320i owners would like one I'll give you a special price. The $299 USD price will become $275 CDN.

MarkD

MarkD · 02-10-2004, 02:08 AM

Quote:

Originally posted by ///MsAniTy
well do u kno where i can possibly get that and how much is it?

You can get a SHARK INJECTOR from Turner Motorsports for around $400 USD.

MarkD

///MsAniTy · 02-10-2004, 02:10 AM

but does the shark injector actually work?

MarkD · 02-10-2004, 02:13 AM

Quote:

Originally posted by ///MsAniTy
but does the shark injector actually work?

I'm sure it works. If you wait till May or so, I'll be FLASHING BMW's also.

Mark

Jon@Bimmersport · 02-10-2004, 02:33 AM

goran, wait for mark....MP328 got the injector and said it did nothing.

///MsAniTy · 02-10-2004, 02:42 AM

well i didnt wanan do the shark either way so when u start flashin post it up

A~G · 02-10-2004, 03:08 AM

HAHA... i got that at Esso and Shell.

i dunno why... guess their backed up on their fuel delivery.

mkgino · 02-10-2004, 03:29 AM

Quote:

Originally posted by Mitch555
I might be putting M3 cams in my car.

y?

Mitch555 · 02-10-2004, 02:58 PM

Quote:

Originally posted by mkgino
y?

I heard it can make a pretty big difference in my cars performance and it will add some more HP (which I need). Have you ever been in a 3er that had M3 cams put in?

**Mystikal** · 02-10-2004, 03:05 PM

Dave, I did notice quite a large difference in fuel consumption when I installed the chip. For an unrelated problem I removed the chip a month later and watched the L/100km average on the OBC climb. I wasn't expecting it at all, but there was an improvement.

Mark, be sure to let me know when the dyno is up and running. I have a few guys in the States interested, pending some stock vs. chipped graphs.

mkgino · 02-10-2004, 04:34 PM

Quote:

Originally posted by Mitch555
I heard it can make a pretty big difference in my cars performance and it will add some more HP (which I need). Have you ever been in a 3er that had M3 cams put in?

Im asking because it seems like a waste of money to mod a 320 motor. The gains from this are rather small and you wont even be anywhere near as fast as even a 325/328. Its like putting an exhaust on a 318 for power, not sound.

$6-700 Cams + $200 installation +250 chip = $~1100

A bit more cash gets you a 325 engine. Plus I have never seen anyone do an M3 cam swipe to a 320i, will it even work? But what do I know............

Mitch555 · 02-10-2004, 06:05 PM

Quote:

Originally posted by mkgino
Im asking because it seems like a waste of money to mod a 320 motor. The gains from this are rather small and you wont even be anywhere near as fast as even a 325/328. Its like putting an exhaust on a 318 for power, not sound.

$6-700 Cams + $200 installation +250 chip = $~1100

A bit more cash gets you a 325 engine. Plus I have never seen anyone do an M3 cam swipe to a 320i, will it even work? But what do I know............

I'm doing this to my 320 engine cuz I don't wanna spend the big bucks on a new one. The only engine I want is an M3 engine if I do a switch. So in a way it is worth it I guess. I just want some more power and gains from my car. I do see where you are coming from when you say it's a waste of money though. I talked to charlie and he said they would fit.

Also it would be different to do up a 320 engine instead. Never seen another one done up.