You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
HI! I replaced my sealed beam headlights on my 1987 325i with
euro ellipsoid smileys. (high beams as well). Does anyone know
how to wire them so all 4 lights come on when I turn on the highs ? I know the sealed beam lows were dual filament bulbs so thats why both came on, but whats the trick to make that happen with these h1 bulbs ?
THANK YOU THANK YOU THANK YOU THANK YOU!!!
now why couldn't I find this site when I did google searches for hours on end..
I will try the relay trick suggested on saturday and let you all know how it went..
By the way, I bought the euro's over a year ago from a parts store in Finland. The low beam side was about 60ish euros each, and the low beams were around 30 euros each. The expensive part was buying the bracket to replace my sealed beam bracket. Dealer item.. plus all the hardware.. clips aiming screws etc etc..
man you made my day dude by posting that site..
Thanks again man. I had the lights sitting around for a year.. a couple weeks ago I installed them.. 2 hours.. 2 or 3 more hours of scratching my head over wiring so all 4 light up... without success.. after reading the link you posted.. 10 mins and lights work..