1994 325i wont turn over PLEASE HELP!!

civic_eater · 10-28-2013, 01:18 PM

So i changed all sensors injectors coils plugs relays pump and still the car wont start i have current going to the pump and still it will not turn on. When i put 12v to the pump it turns on but still the car wont start please help guys i really am stuck... Thx

ScotcH · 10-28-2013, 02:44 PM

Not turn over, or cranking but won't start?

Did you change the crank position sensor? Start with that one.

BigD · 10-28-2013, 03:27 PM

Do you have a CEL when you turn the ignition on? If not then your ECU is dead. Otherwise, pull a plug, see if it smells like fuel. If not then your ECU not getting a crank signal.

civic_eater · 10-30-2013, 10:30 AM

Correction turns over wont start/run

civic_eater · 10-30-2013, 10:31 AM

Yes there is a cel

**T.Dot_E30** · 10-30-2013, 10:44 AM

Check for spark, if you have spark. Check fuel pressure, if you have pressure, check for injector pulse.

Report back on which one you don't have.

If you don't have spark, ScotcH's guess could be right, but i wouldn't change it without trying to confirm the fault.