Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E30 (1983 - 1991)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-22-2013, 05:53 PM   #1
BMe30
all by chance...
 
BMe30's Avatar
 
Join Date: Mar 2008
Location: mississauga
Posts: 819
another m42 oil leak...

not too long ago i replaced the O-ring and gasket for the oil filter canister.

today at the gas station i decided to check my oil.... well there was oil. All over the front of my motor sprayed everywhere. turned the car back on to see where it was leaking from..

the leak is on the intake side where the valve cover overlaps the head and timing chain cover right at the top...

i replaced the valve cover gasket 2 years ago as well

i'll take some pics later....
__________________

Gone but not forgotten
BMe30 is offline   Reply With Quote
Old 01-23-2013, 05:38 PM   #2
BMe30
all by chance...
 
BMe30's Avatar
 
Join Date: Mar 2008
Location: mississauga
Posts: 819
This is where its leaking from...



It looks like i can get away with just removing the upper chain cover... More i have been looking into doing this the more im shaking my head lol.

I'm going to try and start working on it before the weekend so i can finish sunday... I hope!

Need to get that heater going in my garage!
__________________

Gone but not forgotten
BMe30 is offline   Reply With Quote
Old 01-23-2013, 08:40 PM   #3
SamE30e
6th Gear Member
 
SamE30e's Avatar
 
Join Date: Jul 2007
Location: Milton
Posts: 2,870
Front timing cover seal?

I did it on my Ti without removing the crank pulley and lower timing cover...

Just take the pulley off and do it all at once. It will take an extra hour or two, but it will be done properly and not leak. Plus you can do your front crank seal on the timing cover side and the lower timing cover gasket.
__________________
91 318is - M50NV (gone)
02 WRB Subaru WRX EJ207 forged, 320 AWHP stock turbo.
85 - 325
02 325i Sedan
SamE30e is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:09 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.