Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E46 (1998 - 2005)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-07-2012, 08:39 PM   #1
BADRAT
badratart.com
 
BADRAT's Avatar
 
Join Date: Jun 2011
Location: Etobicoke
Posts: 95
Lightbulb DIY Dinoc Carbon fiber shifter plate

ive gotten my hands on some 3M Dinoc Simulated carbon fibre vinyl. for those of you that have used this before, you know how great of a material this is. looks amazing and really easy to work with.

my shifter plate has been peeling and looking ugly so i figured i would cover it up!



this is super easy to do, only tool you will need is a butter knife to pry up the plate. heres how it goes:



Once pried up you will need to disconnect 3 harnesses, 2 on the left and 1 on the right




you will then need to unclip the leather boot from the plate, there are a few clips



once unclipped you can separate the boot from the plate



lift the plate and manoeuvre it around the boot and shifter


once freed up you will want to clean the surface, try to use something without ammonia. if your plate is peeling like mine, you can try to remove as much damaged material as you like. though the carbon fibre material will mask any uneven spots

__________________

Last edited by BADRAT; 09-07-2012 at 11:40 PM.
BADRAT is offline   Reply With Quote
Old 09-07-2012, 08:39 PM   #2
BADRAT
badratart.com
 
BADRAT's Avatar
 
Join Date: Jun 2011
Location: Etobicoke
Posts: 95
continue

you can now peel the cut carbon fibre away from the backing. this i have created on my own and will be selling them for $25 shipped (PM if interested or email badrat*AT*me.com) . if you have the 3M material you can now cover the plate and use a scalpel to cut away the excess material. i have tried the scalpel method before and it is really tricky to cut out where the labels are, which is why i have developed this template.



once peeled up, you will want to position the sticker from the bottom. making sure that everything lines up. work from the bottom to the top - laying the material down while making sure it follows the plate. everything should line up accordingly. if not, try to peel up the material slowly and reposition. the Dinoc is forgiving as long as you dont stretch it or get it too dirty (wash your hands!)



once everything is set, you can now give it a good press making sure it is stuck on well. air bubbles should come out with no problem



now you can reinstall the plate back into you car, follow the instructions in reverse. your car should look nice and clean once again! boom!




i think i might tackle the cluster next
__________________

Last edited by BADRAT; 09-07-2012 at 09:24 PM.
BADRAT is offline   Reply With Quote
Reply

Tags
di noc, dinoc, e46, plate, shift

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.