FS: 17" staggered oz futuras

[GTIDamien]

Thought Id post these here before some vw guy buys them and redrills them

Wheels are in very good condition considering the age. I rather not sell these but I need the money for other things. Overall you could get away with just polishing the lips and hitting the bolts with a polishing wheel to bring out the shine ( they are pretty clean as is now). The centers are in overall pretty good condition, some minor scuffs in the paint but you cant even tell from 3 feet away. I have all 4 caps but cant find the last one at the moment, if anything you can get one on ebay for around $40 or from Koenig Special for 75 euros brand new. The barrels are just about in perfect condition and shouldn't need refinishing.

Specs as follows

OZ Futuras
17"
Fronts - 8 - 9 inches / 2 inch lip, 7 inch barrel
Rear - 9 - 10 / 3 inch lip, 7 inch barrel
Calculate the offsets my self and they are approx et 30 front, et 35 rear
5x120
Center Bore - About 77mm

Wheel 1 - Rear , pretty good condition, minor clearcoat failure on the lip
Wheel 2 - Front, pretty good condition, a bit of oxidation on the lip
Wheel 3 - Front, pretty good condition, barely and clearcoat failure, minor curb rash not very deep
Wheel 4 - Rear, pretty good condition, lip is pretty much mint, maybe a 5mm patch of curb rash you can barely tell

Wheel 1

Wheel 2

Wheel 3

Wheel 4







to see the rest of the pics:

http://forums.vwvortex.com/showthrea...1#post77421471

Looking for $1800 OBO, not really intrested in trades.

if you have any other questions feel free to ask, ill get some test fit photos up of how they look on my mk4 this weekend.

Email me at d_wajs@hotmail.com or pm me on VWVortex - GTIDamien_407. I don't really frequent here so it may take a while for me to respond to your pm's on here.

[GTIDamien]

[GTIDamien]

[Axxe]

Awesome wheels. How confident are you in those offsets?

[GTIDamien]

Originally Posted by Axxe

Awesome wheels. How confident are you in those offsets?

I'm fairly confident I measured them right, but I'll post up some pictures of me measuring them and some of me testfitting them on my Jetta. My friend was over a couple of weeks ago and while we installing his coils on his mkiv golf and they tucked a bit in the from and poked a tad in the rear. If you like you can test fit them before you buy them, I have a jack/ jackstands and a torque wrench.

But anyways the buyer backed out yesterday, so new price 1700obo would like these gone this week if possible.

Ps excuse the bad English I typed that on my iPod

[GTIDamien]

Sale pending, Ill get those pictures up in a few.

[GTIDamien]

front


rear


I measured half the width of the wheel to the backpad

[Axxe]

Jealous. These started out in the same spec as my wheels but where relipped. Your barrels are 6" FYI, and you measure wheel width from bead to bead, which is the inside of the lip that holds the tire.

[GTIDamien]

Got it thanks, so I got 8 in the front and 9.5 in the rear. So did I measure the offsets right? I used the whole width of the wheels from lip to lip and cut that in half to get the center.

[Axxe]

Yup, centre is centre, so long as you are using the same reference points.

[GTIDamien]

Thanks alot, im kind of clueless when it come to wheel stuff haha