Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E36 (1991 - 1999)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-15-2013, 09:15 AM   #1
///M-TRD3
Modeldater
 
Join Date: Jan 2002
Location: GTA/Munich
Posts: 1,733
Question HELP: Exact distance from the front spoiler edge to the cross member? ASAP T.I.A.

Hey Fellas,

Long story short I've been looking into investing in a top of the line jack, something with a low starting point, high max. lift height and from a real quality manufacturer. Having not found the AC Hydraulic DK13HLQ for anything under $550 (or for that matter), I decided to look into Rodcraft because they are well known in Europe for top quality German made parts and have a great line of jacks.

I received somewhat of a one day only price for today on two of their low profile HD jacks and want to check if it's worth the extra cost for the more expensive one which has a low profile that simply runs longer. Can anyone tell or check for me, how long is it from the edge of the M front bumper to the cross member point for jacking? If possible also in the rear to the rear carrier point?

The one jack has a min. lift height of 75mm for the first 295mm of length. The second jack which is about 80 more has a 80mm starting point but for the first 515mm of length.

If the second jack can clear until the cross member and rear carrier for jacking direct from the floor without having to use wood or ramps etc. to get the car higher for clearance first, then I will definately go with it to invest in the jack once and for all that makes life with lowered cars more convenient. Would hate to buy it though to find it it doesn't and I could've saved the money and got the other one because the car needs additional clearance either way.

Thanks in advance! If my car was with me presently I would quickly just stick a measuring tape under there myself, but unfortunately it's not.
__________________
///M-TRD3
///M-TRD3 is offline   Reply With Quote
Old 04-16-2013, 07:07 AM   #2
Dinanstu
2nd Gear Member
 
Join Date: Dec 2011
Location: Toronto, Canada
Posts: 271
I got 31" (to center from spoiler lip), difficult to measure on the ground.
__________________
Need an s54 MZ3 coupe...will trade...
Dinanstu is offline   Reply With Quote
Old 04-16-2013, 09:22 AM   #3
///M-TRD3
Modeldater
 
Join Date: Jan 2002
Location: GTA/Munich
Posts: 1,733
^Hi, Thanks. Yeah I measured last night when I got home and got about 80cm. Measuring again from various angles, I realized that you would eventually want a jack that maintained it's low profile height, in this case 75mm, for about the first 70-80cm of its length to really be able to reach just about everywhere and jack direct off the ground. Otherwise, in terms of the two manufactures I was looking at, you're pretty much equal going for either of the Rodcraft or AC Hydraulic units, save for the price of the AC DK13HLQ.
__________________
///M-TRD3
///M-TRD3 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:13 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.