Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > Classifieds > For Sale > Wheels and Tires
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-18-2012, 01:24 PM   #1
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9
FS: 17" staggered oz futuras

Thought Id post these here before some vw guy buys them and redrills them

Wheels are in very good condition considering the age. I rather not sell these but I need the money for other things. Overall you could get away with just polishing the lips and hitting the bolts with a polishing wheel to bring out the shine ( they are pretty clean as is now). The centers are in overall pretty good condition, some minor scuffs in the paint but you cant even tell from 3 feet away. I have all 4 caps but cant find the last one at the moment, if anything you can get one on ebay for around $40 or from Koenig Special for 75 euros brand new. The barrels are just about in perfect condition and shouldn't need refinishing.

Specs as follows

OZ Futuras
17"
Fronts - 8 - 9 inches / 2 inch lip, 7 inch barrel
Rear - 9 - 10 / 3 inch lip, 7 inch barrel
Calculate the offsets my self and they are approx et 30 front, et 35 rear
5x120
Center Bore - About 77mm

Wheel 1 - Rear , pretty good condition, minor clearcoat failure on the lip
Wheel 2 - Front, pretty good condition, a bit of oxidation on the lip
Wheel 3 - Front, pretty good condition, barely and clearcoat failure, minor curb rash not very deep
Wheel 4 - Rear, pretty good condition, lip is pretty much mint, maybe a 5mm patch of curb rash you can barely tell

Wheel 1

Wheel 2

Wheel 3

Wheel 4







to see the rest of the pics:

http://forums.vwvortex.com/showthrea...1#post77421471

Looking for $1800 OBO, not really intrested in trades.

if you have any other questions feel free to ask, ill get some test fit photos up of how they look on my mk4 this weekend.

Email me at d_wajs@hotmail.com or pm me on VWVortex - GTIDamien_407. I don't really frequent here so it may take a while for me to respond to your pm's on here.
GTIDamien is offline   Reply With Quote
Old 05-18-2012, 03:05 PM   #2
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9








GTIDamien is offline   Reply With Quote
Old 05-18-2012, 03:05 PM   #3
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9






GTIDamien is offline   Reply With Quote
Old 05-20-2012, 01:03 PM   #4
Axxe
Over 9 F**KING THOUSAND!!
 
Axxe's Avatar
 
Join Date: May 2004
Location: Oakville
Posts: 9,768
Awesome wheels. How confident are you in those offsets?
__________________

S52|ZF|TRM Coilovers 670/895|Staggered 18" 5's
Axxe is offline   Reply With Quote
Old 05-21-2012, 12:01 PM   #5
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9
Quote:
Originally Posted by Axxe View Post
Awesome wheels. How confident are you in those offsets?
I'm fairly confident I measured them right, but I'll post up some pictures of me measuring them and some of me testfitting them on my Jetta. My friend was over a couple of weeks ago and while we installing his coils on his mkiv golf and they tucked a bit in the from and poked a tad in the rear. If you like you can test fit them before you buy them, I have a jack/ jackstands and a torque wrench.

But anyways the buyer backed out yesterday, so new price 1700obo would like these gone this week if possible.

Ps excuse the bad English I typed that on my iPod

Last edited by GTIDamien; 05-21-2012 at 12:03 PM.
GTIDamien is offline   Reply With Quote
Old 05-21-2012, 04:55 PM   #6
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9
Sale pending, Ill get those pictures up in a few.
GTIDamien is offline   Reply With Quote
Old 05-21-2012, 05:32 PM   #7
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9

front


rear


I measured half the width of the wheel to the backpad
GTIDamien is offline   Reply With Quote
Old 05-21-2012, 07:01 PM   #8
Axxe
Over 9 F**KING THOUSAND!!
 
Axxe's Avatar
 
Join Date: May 2004
Location: Oakville
Posts: 9,768
Jealous. These started out in the same spec as my wheels but where relipped. Your barrels are 6" FYI, and you measure wheel width from bead to bead, which is the inside of the lip that holds the tire.
__________________

S52|ZF|TRM Coilovers 670/895|Staggered 18" 5's
Axxe is offline   Reply With Quote
Old 05-21-2012, 11:32 PM   #9
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9
Got it thanks, so I got 8 in the front and 9.5 in the rear. So did I measure the offsets right? I used the whole width of the wheels from lip to lip and cut that in half to get the center.
GTIDamien is offline   Reply With Quote
Old 05-22-2012, 02:01 AM   #10
Axxe
Over 9 F**KING THOUSAND!!
 
Axxe's Avatar
 
Join Date: May 2004
Location: Oakville
Posts: 9,768
Yup, centre is centre, so long as you are using the same reference points.
__________________

S52|ZF|TRM Coilovers 670/895|Staggered 18" 5's
Axxe is offline   Reply With Quote
Old 05-22-2012, 09:51 AM   #11
GTIDamien
1st Gear Newbie
 
Join Date: May 2012
Location: Burlington, Ontario
Posts: 9
Thanks alot, im kind of clueless when it come to wheel stuff haha
GTIDamien is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:59 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.