4x100-5x120.65 adapters

325isStephen · 10-15-2011, 05:27 PM

Have a set of month old Motorsport tech/adaptec adapters. Have seen at most 3000kms (h2oi and back)

They are 4x100 - 5x120.65, hub centric (57.1mm) and wheel centric (for corvette wheels)

2 are 18mm
2 are 20mm

Come with all necessary hardware.

Very well made adapters (not my first set from adaptec), no vibrations, all threads are intact (always use my snap-on torque wrench)

Reason for selling is I'm changing up the center's on my rs's for 4x100 ones so I can run wider lips.

They were 400.00 from motorsport tech after shipping + 50 on duties.

Asking 400 OBO

Here's them on my car with the rs's

325isStephen · 10-20-2011, 12:54 AM

ttt

325isStephen · 10-20-2011, 07:54 PM

OBO is the key word

325isStephen · 11-12-2011, 08:30 PM

bump, will ship

clarkpark · 11-15-2011, 10:00 AM

If you can deliver to mississauga I'd be happy to take them pm me.

325isStephen · 11-15-2011, 08:20 PM

pm'd

325isStephen · 11-21-2011, 06:58 PM

bump

325isStephen · 11-25-2011, 04:59 PM

waiting for someone to pull the trigger

325isStephen · 11-30-2011, 11:49 AM

bump

325man · 11-30-2011, 05:05 PM

hey man what offset of 5x120 wheels will work with these adapters?

325isStephen · 12-01-2011, 08:47 AM

Quote:

Originally Posted by 325man

hey man what offset of 5x120 wheels will work with these adapters?

That's a very vague question, it really depends on what look/fitment you want and also the wheel width/tire size.

I was running a 16x9 et 12 with these in the rear, final offset was -6, however i have rolled and pulled fenders along with running a 205/40 tire.

You could run stock e36 fitment wheels with these with the use of a hub ring as the adapters are made for corvette hub bore which is smaller.