Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 1 series
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-04-2011, 09:53 PM   #1
frenchy
1st Gear Newbie
 
Join Date: Apr 2011
Location: Kelowna
Posts: 23
air intake, tail pipe, software

Not too much trafict on the one series.
So i will ask a question to all the pro's out there.
Anyone as updated their air intake and did some software upgrade on their 135.

I might do that this june when the software become avaialble for the 2011,135.
just want to know if it is as great as some people claim.

thanks all.
F
frenchy is offline   Reply With Quote
Old 04-28-2011, 07:06 AM   #2
Kevin_rus
1st Gear Newbie
 
Join Date: Apr 2011
Location: Richmond hill
Posts: 30
I ve got n55 135i with jb3 piggy back system. Runs like a champ never had experience with flash tunes, but people that have done it are happy as well. ( even tho the gains are smaller and $ is way more) .
Intake wise I will be getting an aFe intake for n55 from modbargains.com
It's a bit pricey but after reading all the reviews on it I think it's well worth it. ( btw it's listed for 335, but confirmed to fit 135)

Hope that helps
And yeah... I wish there would be mere action in 1 series forum
Kevin_rus is offline   Reply With Quote
Old 04-28-2011, 08:48 PM   #3
frenchy
1st Gear Newbie
 
Join Date: Apr 2011
Location: Kelowna
Posts: 23
hp and intake

Thanks Kevin for all the good info's.
I'm kind of new with BMW products,
How many HP do you think you have added with the jb3 and which intake were you looking at, at modbargain.

thanks again.
F
I'm still looking for a rear diffuser and some LED tail lights.
If you see some, please email me the links.....much appreciate
frenchy is offline   Reply With Quote
Old 04-29-2011, 06:04 AM   #4
Kevin_rus
1st Gear Newbie
 
Join Date: Apr 2011
Location: Richmond hill
Posts: 30
http://www.modbargains.com/aFe-335i-...90-E92-E93.htm

That's the intake I'm looking to get, stockish looking and good reviews.
Tail pipe, can't really tell you anything about that. I haven't looked into that. I'm pretty happy with the stock one, I did a "t" mod on it and loving it. The only thing I would consider is getting a downpipe, but pricey ....$700
And lights..... Just let em be man, they r good looking as it is
Kevin_rus is offline   Reply With Quote
Old 04-29-2011, 06:33 AM   #5
Kevin_rus
1st Gear Newbie
 
Join Date: Apr 2011
Location: Richmond hill
Posts: 30
Tune options so far: jb3 and procede
Gains are similar, but from what I've learned about em, jb3 is more like install and forget about it, procede is more for people that need a toy to play around with( I.e. Shift light, internal boost gauge etc). Price wise, jb3 is way cheaper, that's why I personally went for it and loving it
On both tunes you get about 50hp and 60tq to the wheels.
Kevin_rus is offline   Reply With Quote
Old 05-18-2011, 11:41 AM   #6
frenchy
1st Gear Newbie
 
Join Date: Apr 2011
Location: Kelowna
Posts: 23
Jb3

HI Kevin

I think I will do waht you did and get a Jb3.
The stage 1 from Dinan may not be available before another 4 months.
And is cost alot of $$$ for the gain.

Question for you.
Is the Jb3 kit easy to install.
Did you buy directly from Burger Motorsport.
I assume they provide some picture as where each connecters are install.
Did you get that option "CAN tool" with it.

thanks again for all the good info's.
I appreciate all your help.

F
frenchy is offline   Reply With Quote
Old 05-18-2011, 04:04 PM   #7
Kevin_rus
1st Gear Newbie
 
Join Date: Apr 2011
Location: Richmond hill
Posts: 30
Yes, I got it directly from Burger Motorsport, but if you're in GTA we have a dealler that sell them out of Mississauga if you e-mail him you can schedule a local pick up there's the we site www.n54tuning.com. If you buy through the web site delivery in GTA is next day.
My advice to you is to get a can tool and a USB cable all at once to save the hassle. I found Can Tool rather useless aside from deleting codes which you will have running a tune, I don't mean CEL codes, but tuner detection, burnout etc. CT will come handy when taking to stealership for repairs or maintenance.
USB cable is a musg tho... After having fun on stock JB3 settings for about a week you"ll want more and I can promise you that Just any USB cable will not do it has to be a specific one from Burger Motorsport otherwise will not work. With it you can tweak boost settings a bit which will help you get rid of your tires quick
About the installation: pretty easy to install took me about 35-40 min first time I did it,bacause really not to clear in the instructions about the location of the last sensor, but if you use it their installation manual and look close on all the pictures you'll be ok.
Another word of advise, install your usb cable right away if you get it to save the hassle of taking the car apart again

Hope that helps
Kevin_rus is offline   Reply With Quote
Old 05-19-2011, 08:15 PM   #8
frenchy
1st Gear Newbie
 
Join Date: Apr 2011
Location: Kelowna
Posts: 23
N55 stage 1

hi Kevin
Well, The N55 stage 1 or JB3 is on order.
Should be here by next week.

I also install a Sprint booster the other day.
Nice diference on ths gas pedle. A bit pricey, but that was a big deal for me.
Waiting for a carbon rear diffuser.

Anyways, thanks again for all your inputs.

I will let you know what i think when the jb3 is installed.

thanks
F
frenchy is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.