BBB Zero To 60 in 6secs Flat

[ecuconnection]

finaly finished my turbo 12psi M42 build

Fully tunned Motronic by ofcourse me and some help from Jay(everlast) who I thank very very much... I have all the equiptment to fully live tune all OBD1 BMW DME's...If anybody ever need's some more power just let me know lol

Upgrades to come are high strength headstuds, 15psi, light wieght pullys, single mass flywheel, Bigger Injectors, drilled rotors

check out the video... enjoy!

[Blown M3]

From the video the car looks like it pulls hard.
Good work tripple B.

[ecuconnection]

Originally Posted by Blown M3

From the video the car looks like it pulls hard.
Good work tripple B.

couldnt have done it without your help... thanks

[carjoe]

Awesome! How's the rear end holding up?

BTW:I'm going to hit you up on that software...

[ecuconnection]

Originally Posted by carjoe

Awesome! How's the rear end holding up?

BTW:I'm going to hit you up on that software...

Rear end no problems I still shit like a animal but thank's for asking lol

Software is cool... I will need your DME last three digits on the top of the case so I can gather the correct BIN & XDF file ... Just cover the cost of the chip so like $5... I have seen the dinan tune and they don't even touch fuel insted they advance PT and WOT ignition timing by a considerable amount over stock and thus the need for 91+ octane however we can back the timing off slightly and be a little safer and still see nice gains plus raise rev limit, top speed and a few other goodies ... just let me know

[Bullet Ride]

So what do you think you're making hp wise?
If you're doing 6sec flat I'd guess around 210-220 at the crank.

[bmdbley'sBro]

dude fkn awesome

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

[ecuconnection]

Originally Posted by Dinan_M5

So what do you think you're making hp wise?
If you're doing 6sec flat I'd guess around 210-220 at the crank.

more then a e36 m3 ... the supercharger kit at 10psi makes 200whp

[ecuconnection]

Originally Posted by bmdbley'sBro

dude fkn awesome

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

Thanks

[Bullet Ride]

Originally Posted by BearsBmw

more then a e36 m3 ... the supercharger kit at 10psi makes 200whp

Well the e36's with the s52b32 (240hp) weigh ~3100lbs and do 0-60 in ~6sec.

Your 318i weighs ~2600lbs. I don't know exactly how the gearing compares but if you're making more hp than an m3 I would think your 0-60 should be better than 6 flat.

[ecuconnection]

Originally Posted by Dinan_M5

Well the e36's with the s52b32 (240hp) weigh ~3100lbs and do 0-60 in ~6sec.

Your 318i weighs ~2600lbs. I don't know exactly how the gearing compares but if you're making more hp than an m3 I would think your 0-60 should be better than 6 flat.

I spin bad on launch with my cheap tires and sometimes in second
Also surface is full of winter sand

Few races from 1 2 3 gears that I have beaten by 1-2 car lengths at the bank parking lot

Also using 20w50 in the motor and 85w90 in the tranny witch is over kill and is robing some ponys

AWD talon on 10psi
Nissan Sentra R on 10psi
E36 M3
5.0 mustang tuned to 232whp

[Eurostyle]

Originally Posted by bmdbley'sBro

dude fkn awesome

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

I got a few M42's for sale...From "cheap" to "mint"!!!
Also MIGHT consider selling my rebuilt M42, so i can upgrade to M52

[m3convert]

ill race you with my stock e36 m3 for money

[m3convert]

and you dont spin bad at all first for a lil u connect all way after second

[chromius]

Good stuff man