S52 M3 Camshaft gear placement

Blown M3 · 05-21-2009, 11:49 AM

Dose anyone know where the secondary cam gears are placed on a 98 M3 S52? I am talking about the gears that go from the exhaust cam to the intake cam for the VANOS. as far as I know the primary gear from the crank, The holes should be as far as they can go to the left when the cams are locked and with the motor at top dead center on #1 cylinder, and then the gears from the exhaust cam to the intake cam is what I am having problems with. If anyone could help that would be appreacted. Mabey some Pics

MANDD · 05-21-2009, 01:26 PM

I just sent you the complete removal install procedure it should be about 14 pages.

Mark.

Blown M3 · 05-23-2009, 10:26 AM

MANDD thank you very much for faxing me the insulation instructions it was very helpful.
Thanks