Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > Wheels&Tires
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-18-2010, 01:17 AM   #1
blk325i
3rd Gear Member
 
blk325i's Avatar
 
Join Date: Feb 2006
Location: kitchener
Posts: 537
fender work

so i put on my 19" ch's today, the set up i had with the ltw's was just a drop in the front with H&R sports with 15mm spacer in the back, plan was to lower the rear as well when i put the rims on, but i left the stock height and spacers in the back just to see what it would look like,put them on and fell in love, who knew poking was soo good haha rear end is a little too high but it looks so good that i'm going to keep it that way, problem is it rubs waaay too much, any bump i hit on the highway and any bump i hit on the street with another person in the car

anyways just wondering what kind of fender work do i need to do to keep this set up? would i have to pull my fenders? and if i pull them would i be able to not pull them all the way? i still wanna have a bit of the fender point down
thanks in advance and my bad about the big write up
blk325i is online now   Reply With Quote
Old 03-18-2010, 06:43 PM   #2
Mystikal
Moderator/Event-Coordinator
 
Join Date: Feb 2002
Location: Stance
Posts: 12,754
To answer this, one would need to know:

Tire size
Wheel width
Wheel offset
__________________

@stancejay
Mystikal is offline   Reply With Quote
Old 03-18-2010, 07:44 PM   #3
doogee
Stance is Gay.
 
doogee's Avatar
 
Join Date: Jun 2007
Location: Ancaster
Posts: 3,439
Send a message via MSN to doogee
^^ True.

I had the same problem and ended up ordering a much stiffer coilover setup.
__________________


Dakar M3 Track Build Thread
doogee is online now   Reply With Quote
Old 03-18-2010, 10:26 PM   #4
blk325i
3rd Gear Member
 
blk325i's Avatar
 
Join Date: Feb 2006
Location: kitchener
Posts: 537
235/35
19X8.5
et35(with the spacers the rears are et20)
blk325i is online now   Reply With Quote
Old 03-18-2010, 10:28 PM   #5
doogee
Stance is Gay.
 
doogee's Avatar
 
Join Date: Jun 2007
Location: Ancaster
Posts: 3,439
Send a message via MSN to doogee
Sounds like you need to go to a smaller spacer. Are your fenders rolled yet?

Personally I wouldn't pull the fenders.
__________________


Dakar M3 Track Build Thread
doogee is online now   Reply With Quote
Old 03-19-2010, 02:14 PM   #6
blk325i
3rd Gear Member
 
blk325i's Avatar
 
Join Date: Feb 2006
Location: kitchener
Posts: 537
i'll try a ten and rolling them

thanks man
blk325i is online now   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.