Alright guys, the time has come to let her go. I have owned the car for over 5 years and its been a blast driving it specially after the single turbo setup but now priorities have shifted so its time to say goodbye.
I'm sure a lot of you guys are familiar with the car and the amount of work that has gone into it but here is a not so quick run down of the car.
The car is a 1990 325 I , I bought the car in early 2003 from a friend who bought it for him self after looking for one for about 3 years but had to leave the country. At the time it was probably one of the cleanest e30s in town but now its starting to show her age on the surface.
The chassis is very clean. the only rust are is one corner of the battery tray. Everything after the front fenders is clean, the hood has some rust so does the sunroof panel ( I have a new one ). The car has never been in any accidents.
Here is a list of the things that were done under 10k ago.
Main bearings and bolts
Rod bearings and bolts
All seals and gaskets
Turbo back 3inch exhaust with Magnaflow muffler, high flow cat and tips
Oil cooler and lines
Rear shock mounts
All turbo related components
MS and wiring
Here is a list of things that were done in the last few years.
Bilsien shock front and back
Short Shifter (B&M)
Wheels and tires
Here is a list of things that are needed
The emergency brake system is not working, it needs the rear cables and shoes.
Driver side front wheel bearing.
Rear sub frame bushings.
The car was dyno tunned at Tag Race Craft right after the break in, it put down 330whp and 325wtq, it was also street tunned extensively for good daily driving.
It also ran a 13.3 @ 113 mph at TMSP last month.
The car is an absolute blast to drive and its not easy letting it go but for now this is the right thing to do.
I have a ton of extra parts that come with the car as well, including a set for 4piston calipers, cylinder head, stock intake manifold ect.
Now for the price. I realize it would be unrealistic if I ask for every penny I have put into the car, not to mention the amount of labor I have put into it so keeping that in mind I'm gonna start with an asking price for $ 7800 which I think is a fair price.
You can get in touch with me by PM or my email address firstname.lastname@example.org
or by phone @ 647-448-3166