Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 5 series
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-10-2018, 01:22 AM   #1
lockeed
1st Gear Newbie
 
lockeed's Avatar
 
Join Date: Jul 2017
Location: Quebec
Posts: 44
Anyone used the Foxwell NT630 Scan tool to reset their ABS module?



I received my Foxwell NT630 and I replaced my faulty ABS module on my E39 M5. I plugged the programmer and wanted to re-calibrate/reprogram the new module so finally turn off the traction control light in the cluster.

I did what I though, erased the codes etc... and but light is still there, I was wondering if any of you can shed some light on the actual reset procedure/programming for a new module.

Thanks

__________________
_________________________
E90 M3 6MT - Apline white
E46 M3 6MT - Titanium Silver
E39 M5 6MT - Titanium Silver
W211 E55 AMG - Silver
lockeed is offline   Reply With Quote
Old 02-11-2018, 11:52 AM   #2
MANDD
Autobahn East
 
Join Date: Jul 2005
Location: Ajax
Posts: 303
This unit will not "code" an ABS module. Typically the ABS/DSC module must be "coded" to the vehicle.

What faults did you have before replacement of the module?

What faults do you have now with the replacement module?


Mark.
MANDD is offline   Reply With Quote
Old 02-11-2018, 10:38 PM   #3
lockeed
1st Gear Newbie
 
lockeed's Avatar
 
Join Date: Jul 2017
Location: Quebec
Posts: 44
Now it says "no communication between etc....) don't remember the exact words, but from what I gathered from a friend and another forum, it just needs to be coded using NCS... I had to order a cable so when it gets here, I'll to the coding procedure and it should solve the problem...
__________________
_________________________
E90 M3 6MT - Apline white
E46 M3 6MT - Titanium Silver
E39 M5 6MT - Titanium Silver
W211 E55 AMG - Silver
lockeed is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018