Project update...sorry no pics....

[dble Trouble]

This thread is starting with a whole bunch of fail as I didn't take pics along the way, I'll post finished pics when I'm done! It all started when I dropped a valve in December. Parked the car, and started to think about what I wanted to do at that point. After a lot of thought, and changing my mind about 300 times, I decided to put a stock M20 back in. Two reasons, one, I don't intend on keeping the car for more than another year, and the other because I would never get my money out of a swap with something else, especially since it's a 4 door.

So I got an M20 in very unbelievably good shape, and decided to freshen up a bunch of things. Slave cylinder(on order), brake calipers, gas tank, fog lights, sport leather interior, reverse lights working, e36 M3 steering rack and that's about all I can think about for now. The project isn't done but after today there is exhaust, power steering, a/c, driveshaft, rad, coolant hoses, shifter to connect and that's about it. I'm hoping I could have the car back on the road by next weekend.....At this point that's a lofty goal as I have a lot of commitments between now and then but I'm going to try!!!

An unbelievably big thank-you goes out to all that helped along the way Scott, Graeme, Mike, Devon, Dave, Kurt, and a Huge thanks to Richie for parts, transport and labour!!! You guys are what the Bimmer community is all about!

I'll update with pics after I clean up the car!

Thanks again guys!

[richie_s999]

So how did the progress go Friday? Sorry since I'm working this weekend had to give one day on Easter to the wife.

is the motor in yet, I picked up an engine hoist with fold-able legs and a leveler on Wednesday, let me know if you need the leveler attachment to throw the motor back in.

[Bullet Ride]

John, we absolutely need a picture of you standing in your engine bay with no motor in it with a confused look on your face and shrugging your shoulders.

I'd get it printed on t-shirts...

[dble Trouble]

^^You have too much time on yor hands buddy! LOL^^

Richie, I guess you didn't read the OP. Reread it. I've liste all that there is to be done to complete it......

Yes I have a crappy cell phone pic of me standing in the engine bay, I'll post when I find a moment!

[richie_s999]

Yes!!! That means I get a weekend off lol!!!!

[richie_s999]

Oh I remember one more thing... The IX skirts!!

[E30M42cab]

Originally Posted by Bullet Ride

John, we absolutely need a picture of you standing in your engine bay with no motor in it with a confused look on your face and shrugging your shoulders.

I'd get it printed on t-shirts...

I told him we needed the mandatory engine bay monster pic to make it official, but it's too late now. We got his new engine put in over the weekend.

[Bullet Ride]

haha well played Scott

[e30tOny]

[dble Trouble]

Another night in the garage, and almost there! Thanks Graeme!

[Bullet Ride]

Ditto. I was out fiddling with my turbo heap until 12:30.

Since first start up and break in are non issues with this pre-seasoned motor you're swapping in.... I think the typical first start video should be replaced by a first burn out video...

[E30M42cab]

Should I bring my coveralls on wednesday? Meeting over at 10pm, work on car until midnight?

[dble Trouble]

^^too late, but if you want come over on Sunday around 2, Graeme's coming and we'll have the car on the road in two hours or less!!!^^ Then I'll take some pics and post some.

[nonlocal]

-13 and snowing here tomorrow night... **** you guys

[dble Trouble]

22 degrees tomorrow............. Sucks to be you right now. With all of the money you're making out west are you going to be buying another proper BMW or what? We need to see out at the track with da boyz!