Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E46 (1998 - 2005)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-19-2017, 09:20 PM   #1
Bimbam
1st Gear Newbie
 
Join Date: Dec 2017
Location: Toronto
Posts: 4
Need help - Vanos timing off?



Hello all. New to the site and forum. Not sure if this is the correct place for this question. If not please let me know.

Just installed a rebuilt vanos unit on 2005 325i E46. Have not started it yet. Problem is I don't know if the timing will be off or not since the secondary chain moved during install. As I was tightening the left head screw on the unit I tighten a bit too much and the piston turned, which also caused the secondary chain to move approx 1 link distance to the left. The other sprocket also turned, but not sure if the vanos piston turned with it since it was not tightened yet. The cams did not move, and the crank did not move only the vanos pistons and secondary chain moved.

Question is: Will the timing of the vanos be affected to the point it may cause a valve to hit the piston. Do I need to remove the unit and reset all the timing or is there some way to turn the chain back 1 notch. Any ideas on how to solve this issue?

Thanks,
Bimbam is offline   Reply With Quote
Old 12-20-2017, 10:45 AM   #2
doogee
6th Gear Member
 
doogee's Avatar
 
Join Date: Jun 2007
Location: Ancaster
Posts: 3,571
Better safe than sorry.

Check timing and R&R the Vanos before you put it back together.
__________________


Dakar M3 Track Build Thread
doogee is offline   Reply With Quote
Old 12-20-2017, 05:10 PM   #3
Bimbam
1st Gear Newbie
 
Join Date: Dec 2017
Location: Toronto
Posts: 4
You may be right.

Thanks for the feedback. You might be right, better safe then sorry. Hoping to get some feedback from someone that had this very issue or from a mechanic that may know for sure what the effect will be.
Bimbam is offline   Reply With Quote
Old 12-21-2017, 07:10 AM   #4
ZiMMie
6th Gear Member
 
Join Date: Oct 2002
Location: T-Dot
Posts: 9,992
You should not attempt to do any vanos work without timing tools no matter what you read. Even if it's off by a few degrees, tooth's, turns etc. the compensation factor from the dme is not enough for optimal power.

Sent from my Redmi Note 4 using Tapatalk
__________________
#E36-S54 #CSLWannabe
ZiMMie is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018