Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E36 (1991 - 1999)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-21-2006, 01:14 PM   #16
JazzM
6th Gear Member
 
Join Date: Oct 2003
Location: Milton
Posts: 4,506
Another thing you can check is to make sure your wheels are balanced and properly inflated. This way you can see if there are any dents in the rim which can cause vibrations. Plus its the least expensive check.

You should check your tie rods as well. With the car jacked up see if there is any side to side play in the wheel.

Control arms and bushings should be replaced every two years if you drive your car hard as good maintenance practice. This will give you new bushings and ball joints. They will last longer however if you talk or check turner's website they recommed replacing them every two years.

Mine will be due this spring I will probably replace them over the winter.

T.
__________________
T.
JazzM is offline   Reply With Quote
Old 08-29-2006, 06:32 PM   #17
bikemx423
Bayern Motor Werks
 
Join Date: Aug 2006
Location: Summit County/ Denver Colorado
Posts: 13
Send a message via AIM to bikemx423
Does this take a genious to figure out u need new rotors?
bikemx423 is offline   Reply With Quote
Old 08-30-2006, 11:52 AM   #18
Quickid
3rd Gear Member
 
Join Date: Aug 2006
Location: West End
Posts: 425
Quote:
Originally Posted by bikemx423
Does this take a genious to figure out u need new rotors?
See post #14..... he did that already
Quickid is offline   Reply With Quote
Old 08-31-2006, 12:39 AM   #19
ecuconnection
6th Gear Member
 
ecuconnection's Avatar
 
Join Date: May 2006
Location: Ottawa
Posts: 2,018
It doesnt take much to throw off your alignment. I ran on a track for 5 mins doing hard turns and the car was never the same again, prob shot my bushings to hell, doing it
ecuconnection is offline   Reply With Quote
Old 08-31-2006, 09:15 AM   #20
Danila318is
2nd Gear Member
 
Join Date: Jul 2006
Location: Toronto
Posts: 78
Send a message via ICQ to Danila318is Send a message via MSN to Danila318is
Guys, thanks for all your help. All I did was wheel balancing and the problem was gone!!!
Danila318is is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:59 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.