canadian supercharger dealers?

martinM5 · 07-23-2006, 10:36 PM

Is there anywhere close by that you can get hooked up with a S/C kit? Or is it all US delivery?

Furious · 07-23-2006, 10:51 PM

i havent seen anyone in canada yet. that is in terms of a kit, im sure you can find the right S/C though

Quack · 07-23-2006, 11:21 PM

if you want to pay a arm & a leg you can try Engineered Automotive, they are the authorized Dinan dealer

Hamann330ci · 07-24-2006, 01:42 PM

Well I'm supercharged and I live in T.O. I drive a 330ci. Its putting down 325 to the wheels right now. That about 390hp to the crank.

I'm upgrading my kit, if you are interested let me know

If your car is a e46 then I can help you out

cisco911 · 07-24-2006, 02:40 PM

Hey Hamann is your car imola red with a carbon fibre hood by any chance???

Hamann330ci · 07-24-2006, 02:56 PM

steelgrey with hamann rims

Darkness95m3 · 07-25-2006, 03:56 PM

Quote:

Originally Posted by Hamann330ci

Well I'm supercharged and I live in T.O. I drive a 330ci. Its putting down 325 to the wheels right now. That about 390hp to the crank.

I'm upgrading my kit, if you are interested let me know

If your car is a e46 then I can help you out

Huh?
What make of supercharger?

martinM5 · 07-26-2006, 08:55 PM

I don't beleive one off an E46 330 would fit a e 36 M50, although it would be possible it is a headache with the electronics.

velocity · 07-27-2006, 01:43 AM

Hi, my name is Alex. I am the proud owner of Velocitymotorsport, located in Edmonton, Alberta, Canada, I am a distributor for vf-engineering s/c. I became a dealer for them just about 2 months ago, i have sold 2 kits all ready, the costumers are very happy with the kits, they take 8hrs to install, i did a '94 325is, '90325is/95m3 motor, and my '98 4door m3.If i can help you in any way please contact me at 780 4791089 or 780 9056936.
Thanks.

$500bimmer · 07-27-2006, 01:22 PM

a shop near b does alot with turbos and s/c concepts in motion is there name the owners name is derek really good guy

MarkD · 07-29-2006, 07:30 PM

Quote:

Originally Posted by Quack

if you want to pay a arm & a leg you can try Engineered Automotive, they are the authorized Dinan dealer

They are not any more "authorised" than any other Dinan dealer. I just returned from Oktoberfest in the USA and talked with Steve Dinan and some other Dinan marketing types. They wanted to have a closer relationship with the dealers so now EA is just another dealer, on the same level as Budd's etc.

MarkD

STALKER · 07-30-2006, 02:50 AM

Quote:

Originally Posted by MarkD

They are not any more "authorised" than any other Dinan dealer. I just returned from Oktoberfest in the USA and talked with Steve Dinan and some other Dinan marketing types. They wanted to have a closer relationship with the dealers so now EA is just another dealer, on the same level as Budd's etc.

MarkD

They were the first in the area I believe and know the product better then any dealer would. I also believe that dealers send cars to them to have the Dinan work done in some cases.
I wish they were not so $$$.

STALKER · 07-30-2006, 08:00 PM

On a side note, Mark, how do you feel about Dinan software, any good?

MarkD · 08-05-2006, 09:37 AM

Quote:

Originally Posted by STALKER

On a side note, Mark, how do you feel about Dinan software, any good?

I only know what people tell me so it's not first hand information. People have switched from Dinan to mine and liked my s/w better. Also, I feel that Dinan has a few too many stages for n/a motors. I think they do that to sell cai's etc, and their stage one s/w probably does very little. But overall, all their other products and software for s/c motors is good. People say they are expensive and sure they are, but you have to pay for all that engineering.

STALKER · 08-05-2006, 10:09 PM

Quote:

Originally Posted by MarkD

I only know what people tell me so it's not first hand information. People have switched from Dinan to mine and liked my s/w better. Also, I feel that Dinan has a few too many stages for n/a motors. I think they do that to sell cai's etc, and their stage one s/w probably does very little. But overall, all their other products and software for s/c motors is good. People say they are expensive and sure they are, but you have to pay for all that engineering.

Thanks for the feedback. Im running Dinan Stage 5M, just wanted some feedback.