Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > Audio/Sound
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-17-2006, 09:20 PM   #1
Swerve
///Maquina
 
Swerve's Avatar
 
Join Date: Oct 2005
Location: Vancouver, BC
Posts: 642
E36 Door Tweeter Install with Pics

I bit the bullet and decided to get some good tweeters in my doors, I picked up some MB Quart 19.02 NX 3/4” tweeters off ebay. See this thread for history of my dilemma: http://www.maxbimmer.com/forums/showthread.php?t=65192

I apologize that the pics aren’t better, I don’t have a digicam and had to make do with my V400, so these are .33MP pics. Of course there has to be something inside of the camera that got in all these pics.

The goods:





First, thing I did was go to the stealer to pick up some door clips, p/n 51411973500, List 1.05CAD each, because I already had 2 broken ones I knew about and with the car being 11 years old, you figure they’re going to be brittle and that they’ll break easily.



After GENTLY prying at each clip with a flat head and disconnecting the mid and tweeter harnesses, I set the panel down to glue up the loosened brackets. Glue wasn’t enough to hold these panels together over the years, and being left without another option, I glued the loose areas back together again.



Once I had them off, I removed the blown tweeters and mids from the panels, and then removed the speakers from the grilles themselves.



I then soldered up the crossovers to the OEM mids. The mids are 8ohm and the tweeters are 4ohm, and when wired in parallel equal a 2.67 ohm load on the amplifier, which I’m comfortable it can handle considering the wattage it will really be outputting will be less than 50W each side. Once soldered up, I slapped the replacement into the grille, and pushed the tabs back into place.



Now the fun part: Dremeling the opening in the OEM tweeter grille to a size large enough for the new tweeter. This was time consuming, as I took it very slowly to make sure I had a very round opening. I also had to dremel down some tabs in the grille for the tweeters to sit flush. I wanted this install to be stealth and didn't want to modify the panels at all. I went the MB Quart grille route before and that lasted about 2 months in my car before they were stolen. Stealth is the way to go and the OEM grilles look good, IMO.

Half-way there:


Almost:


Done:

Last edited by Swerve; 02-17-2006 at 09:27 PM.
Swerve is offline   Reply With Quote
 

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 09:14 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.