Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > Audio/Sound
User Name

Welcome to!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-09-2005, 08:10 PM   #1
1st Gear Newbie
Join Date: Oct 2004
Location: Halifax, NS
Posts: 20
Installed Amp/Sub, but I get no sound.

Today I installed a 2/1 Channel Alpine Amp, and a Alpine Sub (don't know the exact models off hand, but I can get them if required.)

The amp turns on, but I don't get anything from the sub. When the light comes on the Amp, what does it mean is working? Does it only mean my remote wire is on right, or does it mean my power cable/ground cable are on right too?

I'm just at a loss at how to trouble shoot this. I have a multi-meter if it helps , but I've never installed this kind of thing before.

Another problem could be my head unit; it's an Alpine 9811. I *think* I have everything set the way it should be, but I'm not 100%. SubW is set to on, and SubW level is 4 or so.

So how can I see if there is a signal comming from the Headunit to the Amp?

Thanks for the help,
Sampson is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 05:06 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018