Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > General > General Discussion
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-26-2003, 08:32 PM   #27
Autotechnica
BMW Traitor
 
Join Date: Dec 2001
Location: Richmond Hill, Ont
Posts: 4,988
Send a message via MSN to Autotechnica
Mystikal,

I hope your comparing Bilstein Sports with Koni Adjustables. Because Bilstein heavy duty's are often mistaken for Bilsteins top line of dampers.

Bilstein only makes the "Sport" damper for a small selection of automobiles. If you look at Bilstein's catalog, all or most Japanese imported cars only have Heavy Duty dampers available and not the Sport. Heavy Duty is best for stock or slightly lower springs, which is what the quotes you provided suggested. Could this be the one you're talking about? In this case, most owners of Japanese imports will definitely choose Koni over Bilstein as they have the sportier and stiffer shocks. For E36, I have heard nothing good about the KONI dampers, but only good things about Bilstein Sport. Some people on BMWPlanet a while back even complained that the KONI's were too stiff for street use, and that the shock travel was too short so they were bottoming out. Bilstein recommends you do not use HD dampers for lowered springs, therefore if E30 owners only have the "HD" dampers availble to them, it would explain why they blow in less than a year.

Bilstein Sport/Heavy duty shocks have been used on BMW's for many years. I think your letting your obsession with slamming your car get to you. It's a good thing to lower your car a little for the street. But if it's not a full out race car I don't see the point. Lowering the car too much puts A LOT of stress on the chassis and suspension components.

Bry
__________________
'02 C32 AMG @ 18psi - Eurocharged custom ECU/TCU, ASP 178mm crank pulley + NW PSK, CM30 i/c pump, NW i/c iso kit, EC i/c, Magnecore wires, NW CAI, SL55 Y pipe, NW ported intake manifolds + gaskets/spacers, NW inconel exhaust manifolds, NW catch can, dual exhaust, H&R sways, H&R coilovers, H&R spacers, Quaife ATB LSD, goodridge lines, EBC yellowstuff, AMG 18" rims, Zeitronix datalogger.


Last edited by Autotechnica; 12-26-2003 at 08:38 PM.
Autotechnica is online now   Reply With Quote
 

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:56 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014