WTB E30 calipers (front & rear)

M50E30 · 07-20-2003, 12:20 AM

Looking for front and rear calipers for my '88 325.

**MUST be new or in excellent shape!

Thanx,
Dave

maverick · 07-21-2003, 02:21 PM

I need to know if your calipers are Girling or ATE and why do you need to replace all four??

anyways let me know
thanks

Nuvolari · 07-21-2003, 06:46 PM

If you are interested, I have all 4 calipers in excellent condition. They were wire wheeled and have no scaly rust on them. All of the bolts are excellent too. To make them perfect I suggest new bleeder valves (the ones I have are not stuck but not perfect either) and new rubber 'accordions'. I'm sure you can get these off of your current calipers. How does $100 for all four sound?

maverick · 07-21-2003, 08:22 PM

Quote:

Originally posted by Nuvolari
If you are interested, I have all 4 calipers in excellent condition. They were wire wheeled and have no scaly rust on them. All of the bolts are excellent too. To make them perfect I suggest new bleeder valves (the ones I have are not stuck but not perfect either) and new rubber 'accordions'. I'm sure you can get these off of your current calipers. How does $100 for all four sound?

thats a good deal....again what are they ATE or GIRLING there were 2 different brands of calipers used on the E30's you cant mix and match and im not even sure that if you change all 4 that the brake lines will match up. The most comon caliper are the GIRILING's check it out. It will be stamped right in to the caliper