Complete setup ready to bolt on. The calipers were rebuilt with ALL new seals. Then sent to Mike the powdercoater for a complete proper powdercoat in silver with black Brembo logos and clear powedercoated on top. Setup is CLEAN. I wash my calipers and Brakes every 2-3 days through my wheels they are spotless. I ran ceramic brake pads so OEM ZCP rotors are full spec thickness. NO track days. NO abuse. NO hard driving. The pedal feel is amazing compared to stock. Includes
2 Front Calipers Rebuilt seals and powdercoated by MTP
2 Rear Calipers Rebuilt seals and podercoated
2 front RR mounts for the caliper with bolts
2 RR rear mounts for the caliper with Bolts
4 stainless lines with correct 90' bend (from RR) All hardware to install
EBC redstuff formula 2k Ceramic pads (super low dust but grab very well.
SPare set of Textar oem pads I planned to use.
OEM zcp Front and rear rotors.
this is the whole shebang. I chose to get all new seals while I was in there and Mike at the powedercoater does an amazing job. The rotors were zinc plated and still are rust free although theyve darkened.
I have photos weighing these and they save 12-15 lbs at EACH corner. over the oem brakes.
Thought I would try here before hitting Kijiji
$2k takes everything.