Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E30 (1983 - 1991)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-10-2013, 05:56 PM   #1
Farintosh
2nd Gear Member
 
Join Date: Mar 2012
Location: Guelph, Ontario
Posts: 77
Lowering time! Too much poke?

Hey!

I bought my first e30 (a vert) just over a year ago and have finally bought some coilovers to lower it. I recently acquired egye30's style 5 rims but on my car they had way too much poke with the 10mm spacers. I tried 5mm spacers but they were grinding so I spent today grinding the calipers down. They now move smoothly but there is still a good amount of poke as you can see in the picture. I'm looking to buy new tires now and am wondering if I should think about stretching tires to fit under the fender? Roll the fenders? Negative camber? Any ideas would be greatly appreciated.

Thanks for your time and input!

A good cleaning is also in dire need...
Farintosh is offline   Reply With Quote
Old 05-12-2013, 12:29 AM   #2
everlast
if I lived . I would be ~
 
everlast's Avatar
 
Join Date: Mar 2004
Location: Ottawa
Posts: 5,847
With camber I'd wager it will be close but fit. Drop it and see!
__________________
everlast is offline   Reply With Quote
Old 05-12-2013, 09:27 AM   #3
karmatose
164.3ci Of Fury
 
karmatose's Avatar
 
Join Date: Jun 2011
Location: London
Posts: 380
Fender flares?
__________________
"She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. " - Han Solo
karmatose is online now   Reply With Quote
Old 05-12-2013, 11:26 AM   #4
Farintosh
2nd Gear Member
 
Join Date: Mar 2012
Location: Guelph, Ontario
Posts: 77
I'm worried about camber because the inside of the wheel is already just missing the strut tower, I probably like 5mm clearance... can only fit the tip of my finger in. Can I lower the car without a huge in creasing in negative camber? if I can't I'll need biger spacers and flares or something...
Hopefully I can sort it out in the next week, just need to source tires out then I'll drop it down.
Thanks for your help!
Farintosh is offline   Reply With Quote
Old 05-13-2013, 12:23 PM   #5
Roysneon
2nd Gear Member
 
Roysneon's Avatar
 
Join Date: Jan 2011
Location: Haliwood
Posts: 266
Don't put fender flares on a vert just to run some style 5's, that's just silly. A little bit of stretch, a bit of camber and a serious fender roll and you would be fine.
__________________


What's the difference between a BMW and a porcupine?
Roysneon is offline   Reply With Quote
Old 05-16-2013, 01:18 PM   #6
supernaught
6th Gear Member
 
supernaught's Avatar
 
Join Date: Aug 2006
Location: Peterborough
Posts: 1,324
Send a message via MSN to supernaught
more pics from different angles with those style 5s on?
__________________

88 325IX TOURING DiamantSchwarz|89 325IX AlpinWeiss|88 325IX DiamantSchwarz
supernaught is offline   Reply With Quote
Old 05-16-2013, 08:46 PM   #7
Lodgick
1st Gear Newbie
 
Join Date: Nov 2012
Location: Ottawa
Posts: 11
Get some stretch on and a little camber like someone else said. It looks close enough that you could fit them reaaallll nice
Lodgick is offline   Reply With Quote
Old 05-17-2013, 06:12 PM   #8
Farintosh
2nd Gear Member
 
Join Date: Mar 2012
Location: Guelph, Ontario
Posts: 77
I went down to stancefactory today an received some much need advice from Jay. He said once the car was lowered on the coils they would fit no problem from the inherit camber. The strut tower would receive camber along with the wheel so it would still clear fine. I'll be sure to post pictures when its all sorted out! Thanks for everyone's insight!
Farintosh is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:30 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.