Bolt extraction? - axle torx bolts 2 stuck
Im in the process of dropping the rear subframe and taking the differential out
Only problem is that I managed to removed 10/12 rear axle bolts. The other two were literally rounded out to circles. It was retarded.
I ground off the heads off those 2 bolts
How good are those bolt extractors? Pretty much my only option is to use one
How easy is it to use one of these? From what i understand, you drill a smaller hole then the extractor and hammer in this tool and reverse it out and it should grab the bolt
Ive soaked the bolt in PB blaster. Just such a headache / mess
96' 328i M Tech