Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 5 series
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-05-2012, 11:39 PM   #1
Qube
5th Gear Member
 
Join Date: Sep 2005
Location: TORONTO
Posts: 1,062
(Faint) brake-engagement when driving...

Trying to narrow down an issue...

Symptom:
- [assumption] occurs only driving over 50kph
- gentle brake engagement intermittently (every 5-10 seconds for 1-2 seconds)
- only occurs on throttle, not when coasting
- appears to happen quicker between engagements at higher speed (eg 100kph)
- not enough braking to stop but enough to feel and notice a very slight drop in revs/speed -- very, very slight
- seems like only passenger front by sound and lots more brake dust

Tried:
- caliper rebuild and disc refinish

There are no lights, no codes, nothing other than the faint grinding sound every so often. It's "on / off" grind/sanding sound without any apparent fade.

It APPEARS to have a pattern when driving at a constant speed on throttle (eg. 2 sec on, 4 sec off, repeat) but unquantified.

Car is a 2002 540i so it has DSC. Again, no lights are on or turn on when that happens. Also happens if DSC is turned off (just for the heck of it).

I want to try and see if the sound timing is exactly the same every time at a certain speed, but beyond that, I'm stumped.
__________________

.
Qube is offline   Reply With Quote
Old 10-07-2012, 09:11 PM   #2
MLue1
3rd Gear Member
 
MLue1's Avatar
 
Join Date: May 2008
Location: Markham
Posts: 452
Strange never heard of this... maybe a wheel speed sensor going south.
__________________
Mark
'99 E39 540iT
MLue1 is offline   Reply With Quote
Old 10-09-2012, 05:49 PM   #3
Qube
5th Gear Member
 
Join Date: Sep 2005
Location: TORONTO
Posts: 1,062
Well some more revelation today:

1. appears to only happen over 50kph
2. nearly always happen during gradual acceleration between 70-80kph
3. happens intermittently above 80kph even at constant throttle
4. never happens when coasting

Had the car up on a lift and can replicate the same sound by accelerating in any gear (easiest to hear in 4 or 5) to about 80kph then SIMULTANEOUSLY tapping the brakes.

The sound is isolated to the LEFT (driver) rear. The axle shaft on that side is looser and has a lot more lateral play than the right. Upon the "move", it appears the shaft moves outwards (as it should) and the sound occurs ALONG with a very small drop is speed/rev. This may be due to the inherent friction slowing that drive wheel down (?)

A rebuild of the axle and replacement hubs are on the list.

Having said that, would this cause added brake dust on the RIGHT front? That is, the complete opposite end of the car? Could it interpret that speed difference there and actuate the opposite front brake? There is definitely increased brake dust on that side which may or may not be a symptom.

Having a data logger and watching the wheel speed through Autologic (cannot monitor ABS when driving), there doesn't appear to be any change in speed per wheel. Not noticeable at the resolution and sample rate it's running any way.
__________________

.
Qube is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014