Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E30 (1983 - 1991)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-11-2011, 06:54 PM   #1
InfiniteDice
14 Years with the E30
 
InfiniteDice's Avatar
 
Join Date: Sep 2006
Location: St. Catharines
Posts: 1,126
Brakes are giving me the breaks.

Seriously I'm no newbie to thins crap but I'm not having any luck.

So..

I swapped out my master for another good master I had figuring it might solve my recently softer than usual pedal feel.

Didn't change anything.

So I figured hey... it must be a seal the booster then. So I changed my ATE booster out with the shinier Girling one I had sitting on a shelf for a few years.

So after all the BS of swapping it out... I go to bleed the right rear and get my GF to pump it up then hold... I loosen the bleeder and drop.... .... .... drop.. ... . So it's not holding pressure, I even pulled the bleed screw right out.

Now I'm wondering if the Girling booster is compatible with the ATE master I'm using.

Tomorrow I'm going to try all over again swapping to another ATE booster I found, I know it works but it's not as pretty as the Girling.

Another question... the valve on the booster to throttlebody hose, is that supposed to let air into the throttle body? or let air from the throttle body into the booster?

Thanks guys. It must be something simple. And yes I have a new seal between the master and the booster.
__________________




Performance one step at a time.
InfiniteDice is offline   Reply With Quote
 

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.