Anyone know what these are?

E30 Kid · 09-25-2010, 11:42 AM

I have a set of four 16x8 rims with a 5x120 bolt pattern. I am not sure what the offset is - I could not see anything on the rim that stated it. They weigh approx. 18-19lbs. The sticker on the rims say they are manufactured by Wheel Components INC. They have no physical damage to them however the one rim has a chip in the chrome plating, however it is not noticeable while on the car on the road.

What could I ask for them if i polish them up? or if any one wants to trade?
thanks rob

richie_s999 · 09-25-2010, 12:20 PM

Ac snit's either real or reps, unfortantly most people stay away from 16's as tire selection is poor.

crxgsr · 09-25-2010, 12:21 PM

Here's how you can measure offset.

- pop the center cap out.
- with the wheel flat on the ground, measure the distance from the floor to the mounting surface in mm (write it down)
- measure the wheel's width in mm (you mentioned 8 inches wide before)
- divide the width by 2. (write it down)
- take the first number and subtract the second number and you get the offset plus or minus a couple of mm.

doogee · 09-25-2010, 02:01 PM

Well's they 16" replicas so you aren't going to get much.

Maybe $300-400?

richie_s999 · 09-25-2010, 03:54 PM

Quote:

Originally Posted by doogee

Well's they 16" replicas so you aren't going to get much.

Maybe $300-400?

200 max, sellem quick and be done with them.

E30 Kid · 09-26-2010, 12:55 PM

there pretty mint, i need to polish them this weekend!
ill probably be asking $400, 100 a rim is pretty cheap for winter rims