Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E46 (1998 - 2005)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 07-02-2010, 03:57 PM   #1
nachos23
SweetXi
 
Join Date: Jun 2009
Location: Brampton, Ontario
Posts: 960
Send a message via MSN to nachos23
Cool DCT Shifter retro-fit into e46

Some of you might have seen my previous posting in regards to trying to get a DCT electronic shifter to work in an e46.... http://forum.e46fanatics.com/showthr...701&highlight= or previous to that ....http://forum.e46fanatics.com/showthr...381&highlight=




Well, I can close those threads down. Got all my answers from tracing out circuitry and metering out voltages, etc. Have to thank Arty :thumbup: :thumbsup: for the idea of isolating the selector switch (had thought of it Arty, didn't think it was isolated like that) and Delmarco :woot:for getting me interested in the mod in the first place. Not going to repeat mechanical steps, Delmarco covered them extremely well in his post http://forum.e46fanatics.com/showthread.php?t=760259

Well, got it working by isolating the selector switch; applying power to the common terminal vs. grounding as it was originally connected. Moved cables and terminals from existing lighting panel (bought to be salvaged) and extended the data cable on the DCT shifter (actually nicked it when drilling out the centre of the shifter to allow installation on the stock e46 stock, so I had to remove and recrimp connector; so extended it another 6 inches)....

That addressed the PRND lights, but I had to use a micro relay and another series resistor and diode (to replacate original diode betweens pins 1 & 3 on X1600) and then use the ground connection to close relay. Other side of relay runs batt voltage through 610ohm resistor to drop voltage to power M/S LED. Only thing I've not addressed (would require a little more circuitry (maybe version 2 LOL) is that the D LED remains on when the M/S LED is lit. Personally, I like it, but could design a cancellation circuit to turn of D LED when M/S selected (like I said, maybe version 2). Going to add 0.5A micro fuse to both power lines on board (batt and dimmer) to protect incase of short and will eventually put cover on box to close. Right now tucked next to lighter under console. Ribbon cable is routed so it rests on Shift release motor and seems to move freely in all positions.... Will check in a few weeks and see if there are any rub marks present...

Here's the pics.















Final assembly.... Nice and neat!!



Still need to integrate electronic shift lock into P switch on shifter. Maybe this weekend....
__________________
My Ride:
2009 335i Xdrive
JB4 and BimmerBoost Back-end flash
AA race FMIC and Diverter/Blow-off
H&R Coilovers
aFe CAI
& a few other goodies


nachos23 is offline   Reply With Quote
 

Tags
conversion, dct, diy, e46, retrofit

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:05 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.