Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E30 (1983 - 1991)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 06-29-2010, 07:48 PM   #1
Flipr78
1st Gear Newbie
 
Join Date: Jun 2010
Location: Goderich, Ontaio
Posts: 23
How to change my Fuel Injectors - M20

I am new to all this, never owned a German Vehicle before, not that there is that much difference, but can someone show me a good Step by step with pictures of how to swap out the Fuel injectors in a 1987 BMW 325i Convertible?

I have seen a few DIY articles but none with pictures. If anyone could point me in the right direction it would be much appreciated.
Flipr78 is offline   Reply With Quote
Old 06-30-2010, 11:20 AM   #2
everlast
if I lived . I would be ~
 
everlast's Avatar
 
Join Date: Mar 2004
Location: Ottawa
Posts: 5,847
I've never seen a write up with pic, maybe there's some in the Bentley.

http://www.maxbimmer.com/forums/showthread.php?t=130524
__________________
everlast is offline   Reply With Quote
Old 06-30-2010, 01:28 PM   #3
Bullet Ride
Cars in Perpetual Repair
 
Bullet Ride's Avatar
 
Join Date: Nov 2007
Location: Guelph
Posts: 5,749
I should have made a diy when I changed mine last year.
It's not too difficult though, if you read the write ups out there and look at your car you'll be able to figure it out. Just make sure when you pull the line off the fuel rail you have a rag covering it because if you don't gas will spray everywhere. The only thing that might not be detailed in the write ups is that in order to remove the injector wiring harness, the main connector is held in the bracket by a plastic threaded ring, you have to unscrew that then you can pull the harness out.
__________________
Bullet Ride is offline   Reply With Quote
Old 06-30-2010, 01:59 PM   #4
Flipr78
1st Gear Newbie
 
Join Date: Jun 2010
Location: Goderich, Ontaio
Posts: 23
Quote:
Originally Posted by Bullet Ride View Post
I should have made a diy when I changed mine last year.
It's not too difficult though, if you read the write ups out there and look at your car you'll be able to figure it out. Just make sure when you pull the line off the fuel rail you have a rag covering it because if you don't gas will spray everywhere. The only thing that might not be detailed in the write ups is that in order to remove the injector wiring harness, the main connector is held in the bracket by a plastic threaded ring, you have to unscrew that then you can pull the harness out.

thanks for the tips, I am going to tackle it today.
Flipr78 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014