Well it was a LONG day and I am glad I am taking Sundays off now as I am sore from all the rolling around on the ground! Got a lot done tho, including the car back on the ground on its own suspension.
Front = FMS C Springs (1 coil cut) with Racecraft 2" drop spindles (SN95). ISO's are installed and I will need to get the MM CC plates installed to get more camber.
Rear = DECH Grabbers which I have a custom set being made that will further lower the arm by another 1" which should make this rear of the car sit with a slight rake to the front. I also went with the custom coil over design to help keep the spring seated. (Thanks Arachnid for these, i did modify them further to allow for more drop)
The result! Speaks for itself... The rear will be coming down 1 more inch and I will be shaving the bump stops as I am 1/2" away from the axle tubes
More info and detail is posted on the website.