Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > Forced Induction
User Name

Welcome to!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-18-2009, 12:58 AM   #12
4th Gear Member
///tyron's Avatar
Join Date: Jun 2006
Location: whitby
Posts: 690
Originally Posted by e30_kid89 View Post
.82ar will be good. size for a s52.

///tyron, I'd bet they use that t3/t4 for the m50 and maybe m52...I dunno if its me but a .63 seems on the small side for an s52 (3.2L)

Too much backpressure from small sizing = EGT's go through the roof.
It is small. I was just comparing the t3/t4 to the gt30r 1.06 a/r. If that turbo can make 325rwhp with a .63a/r on a 2.5L the gt30 with a 1.06a/r will flow well .

Big D If you look at the compressor map, you should require around 44lb/min of air. At your boost level of 10psi to make your power goal. that should indicate a 1.6 pressure ratio.

The Garrett turbo tech site says "this means that for any engine, in order to make 400 Hp, it needs to flow about 44 lb/min"

If you look at the map you're completely off the efficiency island. I'd say you'd have to run at least 15psi to be with in both the 30r and 35r's efficiency

heres a thread for you. S52 t3/t4 Pump gas 12 psi 360rwhp
///tyron is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 07:50 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018