Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E36 (1991 - 1999)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-07-2009, 09:05 AM   #1
roger
1st Gear Newbie
 
Join Date: Jan 2009
Location: belfast
Posts: 6
Question how would i remove the bk bumper ?

hi i was hopein you guys would be able to tell me how to remove my back bumper i have backed into something and have knocked it off at one side was hopeing its a easy job to take off and just side back in to place ...

cheers
roger is offline   Reply With Quote
Old 02-08-2009, 07:02 AM   #2
328is
tire don't like me
 
328is's Avatar
 
Join Date: Jan 2008
Location: terrebonne
Posts: 209
i't s a very easy job. You have 2 8mm bolts each side inside the wheel well, remove the lower part in the back (2 clips) and then it's 2 TORKS (don't remember the size) bolts that you will have to remove and pull the bumper out.
__________________
race car souldn't be restricted to race track !
328is is offline   Reply With Quote
Old 02-08-2009, 09:12 AM   #3
roger
1st Gear Newbie
 
Join Date: Jan 2009
Location: belfast
Posts: 6
There are no bolts for the rear bumpers.. just a bunch of plastic studs behind the moldings that i had to hammer the pins right thu b4 pulling the rest out and a few small screws on the bottom and in the wheel well. You'll also need to reach in on the left and right side and try to slide the whole bumper outward away from the car.

well i got it off and tryed to get it back on but iv broke the clip that holds it on on the driver side so il be tryin agane once i gt the right part

thank for the help guys
roger is offline   Reply With Quote
Old 02-08-2009, 09:18 AM   #4
328is
tire don't like me
 
328is's Avatar
 
Join Date: Jan 2008
Location: terrebonne
Posts: 209
you are not suposed to remove the bumper from the reiforcement. You're suposed to remove everything together in one pieces.

The 2 TORKS bolt are under the bumper facing strait up. One is close to the exhaust and the other is the other side at the same place.
__________________
race car souldn't be restricted to race track !
328is is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:01 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014