Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 5 series
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-12-2008, 04:12 PM   #1
Dado 540
6th Gear Member
 
Dado 540's Avatar
 
Join Date: Jan 2008
Location: GTA
Posts: 1,971
Exclamation E39 Heater not working at idle

Hope to resolve this annoying issue i've had for some time now.

In the summer very hot heat is comming out of the vents regardles what dial the teperature is on. Once i start the A/C the heat stops and cool air comes out ONLY throught the upper vents. if i select to blow into feet it STILL BLOWS VERRRY HOT. When i turn off the a/c heat is still there just not and hot. Basicaly i cant have any cool air in my feet.

In the winter now, there is no heat while im stopped/at idle unless im driving. When driving the heat is very hot. Again the dials are at 16 dergees celsius. It seems as if they are not working, regardless of what temperature i set.

One more thing. When it rains my windows start to fog up like crazy. As soon as i turn on the a/c the fog is gone. as soon as i turn it off with in a minute it fogs up again. i hope it doesnt rain when it cold out, cause i gotta drive with the a/c on! ahhh

AND...when i open any of the windows or moonroof the air seems to be blowing harder regardles of the set speed of the fan. Wierd! but it doesnt happen when a/c in on.

I've done some research, they seem to be pointing to the thermostat, maybe final stage unit....i donno.... need some expert max members input!!!!

any input is greatly appreciated
Dado 540 is offline   Reply With Quote
Old 11-12-2008, 04:34 PM   #2
MLue1
3rd Gear Member
 
MLue1's Avatar
 
Join Date: May 2008
Location: Markham
Posts: 451
Dado, we addressed this in another thread....the stepper motors that control the air flappers are out of synch. The control unit needs to be reset to factory specs for them to direct the air properly.
http://www.maxbimmer.com/forums/show...01&postcount=4
__________________
Mark
'99 E39 540iT
MLue1 is offline   Reply With Quote
Old 11-12-2008, 05:30 PM   #3
Dado 540
6th Gear Member
 
Dado 540's Avatar
 
Join Date: Jan 2008
Location: GTA
Posts: 1,971
MLue you are right sir. I knew i mentioned it before just couldt find the thread. Thanks!
Dado 540 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 12:10 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.