 |
10-26-2008, 07:40 PM
|
#1
|
|
E30 POWER
Join Date: Mar 2007
Location: richmondhill
Posts: 274
Car: e30 327I TURBO
|
Car shaking
well when im driving around 70k is were it starts but when im driving it shaks very rapidly ,i just put new tires on the frt and had them balanced ,if any body can let me now what they think it might be that would be great thanks
|
|
|
10-26-2008, 07:47 PM
|
#2
|
|
2nd Gear Member
Join Date: Nov 2007
Location: Ontario
Posts: 271
Car: 01 golf 1.8T
|
hmm shaking would be out of balance but since you did that already i gues that would rule that out. check to see if the tires are on properly, maybe they forgot to tighten them
|
|
|
10-26-2008, 07:52 PM
|
#3
|
|
JUICY J CAN'T
Join Date: Jun 2004
Location: T.
Posts: 16,965
Car: S54 titties
|
rims tires on straight/tightened/balanced,
ball joints, control arms, alignment.
that's where i'd start.
|
|
|
10-26-2008, 07:59 PM
|
#4
|
|
biggerthen3
Join Date: Jun 2008
Location: Brampton
Posts: 726
Car: 525i
|
Check the drive shaft..
|
|
|
10-26-2008, 09:14 PM
|
#5
|
|
The Afro-stig
Join Date: Nov 2005
Location: TDot West End
Posts: 4,527
Car: Is Fast. ;)
|
probably the driveshaft center support bearing and/or the driveshaft u-joints giving out.
__________________

|
|
|
10-26-2008, 09:44 PM
|
#6
|
|
Heo Quay
Join Date: Jun 2008
Location: Toronto
Posts: 309
Car: E30/E36/E90
|
hard to really diagnose the problem online. best to bring it to a mechanic and get an opinion. this could be due to a lot of things including a broken engine mount and what is mentioned above. just bring it to a mechanic and they'll tell you. thats your best bet.
|
|
|
10-26-2008, 10:15 PM
|
#7
|
|
6th Gear Member
Join Date: Feb 2007
Location: Pickering
Posts: 2,496
Car: 87,325IS - E36 M3
|
if u just put tires on and it just started to happen than it's either the rims are bent or tires are shit  but if it was happening before
|
|
|
11-02-2008, 05:44 PM
|
#8
|
|
2nd Gear Member
Join Date: Sep 2007
Location: T.O
Posts: 174
Car: EJ
|
Like mentioned before, if it started after you put new tires on then tires/balance is your problem. Otherwise, it could be anything that causes shimmy condition. Where do you feel the vibration, steering wheel or driveline? Check for worn out ball joints, other suspension components. Could be seized u joint on the driveshaft.
|
|
|
11-02-2008, 06:08 PM
|
#9
|
|
Almost Sideways
Join Date: Nov 2007
Location: canada
Posts: 1,879
Car: 1990 325i
|
Quote:
Originally Posted by e30_kid89
probably the driveshaft center support bearing and/or the driveshaft u-joints giving out.
|
if it was the center support bearing, u would feel the vibration in lower gears where there is more torque.....ask me how i know
oes the vibratngo away when u give more gas? how about when u press the clutch down to drop the rpms, does it still vibrate?
are they the same rims with the new tires or new rims 2?
__________________
Last edited by slimjim; 11-02-2008 at 06:12 PM.
|
|
|
11-02-2008, 08:43 PM
|
#10
|
|
2nd Gear Member
Join Date: Jul 2008
Location: mississauga
Posts: 235
Car: 90 325i
|
did it shake before you got your tires mounted? if so, bring them back to double check for improper balancing. If not, check all above posts
We would need more information on what is shaking and at what speeds, such as steering wheel shaking, shaking when braking, off the highway, heavy acc, etc..
|
|
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -4. The time now is 10:03 AM.
|