Endlinks for Eibach sways...

98Dinan3 · 10-15-2008, 12:10 PM

Where have you guys running aftermarket swaybars been getting replacement endlinks? The links on my Eibach kit have started to make some noise, and wanted to get the general consensus of what to go with. Any ideas/links??? thanks guys....

Jon@Bimmersport · 10-15-2008, 12:13 PM

http://www.turnermotorsport.com/html...MS-ADJ-SBLINKS

TMS is good shit

Only for early 92/M3 sway bar link....not the small 93-98 Non M style. I cant remember which ones you had when I did the swap...

98Dinan3 · 10-15-2008, 12:39 PM

yeah...I checked Turner. I have the shorter endlinks for the non-///M style bar.

kenmar · 10-15-2008, 08:34 PM

I pieced together my own replacements for my RD bars from rod-ends from www.racerpartswholesale.com along with a stud bar (for joining the endlinks) and a female connector piece (not sure what it's called). I picked up those extra parts from Brofasco, but I think HD sells the same stuff for much cheaper. I also had to enlarge the holes in my OE hardware because the bolt diameters were slightly different.

I had been running without my rear bar for 2 years because of the worn out endlinks. I finally got around to doing this project this spring and it's been running perfectly quiet since.

98Dinan3 · 10-15-2008, 09:51 PM

^^^ that's kick ass, but I don't have the time to source and piece together the assemblies. I'm looking for something off the shelf that will satisfy my needs...

kenmar · 10-15-2008, 10:21 PM

I didn't either; that's why it took me 2 years to get around to it...