e34 door swap issues, HEELLLPP!
Hi guys I changed the doors on my 525i but the wiring for the door lock seems to be different. The back ones aren't a problem it's just the two fronts.
before when I turned the key it was mechanically moving the solenoid I think. On the doors I put on it's controlled by a switch.
On the doors I took off the actuator is attached to the latch. On the doors I put on the actuator is different and is attached to the handle assembly.
I think I need to wire the key switch to the solenoid somehow to trick the central locking system into thinking I am pulling up the pin that unlocks the doors from the inside.
If that's the case I will need to disable the double locking feature. Is there a fuse I can remove that does this, or am I going about this all wrong. Any help appreciated.