Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > Forced Induction
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-20-2007, 08:52 PM   #16
Autotechnica
BMW Traitor
 
Join Date: Dec 2001
Location: Richmond Hill, Ont
Posts: 4,988
Send a message via MSN to Autotechnica
Quote:
Originally Posted by Gamite
is he there all the time? It's sorta close to my work, I should drop by.
Yep, he's there from like 1pm to pretty much 12 midnight or later. Depends if he has anything to work on. He could be there earlier though, really depends on whether or not he can wake up, lol.
__________________
'02 C32 AMG @ 18psi - Eurocharged custom ECU/TCU, ASP 178mm crank pulley + NW PSK, CM30 i/c pump, NW i/c iso kit, EC i/c, Magnecore wires, NW CAI, SL55 Y pipe, NW ported intake manifolds + gaskets/spacers, NW inconel exhaust manifolds, NW catch can, dual exhaust, H&R sways, H&R coilovers, H&R spacers, Quaife ATB LSD, goodridge lines, EBC yellowstuff, AMG 18" rims, Zeitronix datalogger.

Autotechnica is offline   Reply With Quote
Old 08-20-2007, 10:40 PM   #17
jjm_240sx
KA24DET Expert
 
Join Date: Mar 2006
Location: brampton, ontairo
Posts: 225
Send a message via MSN to jjm_240sx
I could probably do the install as well if your intrested pm me.
jjm_240sx is offline   Reply With Quote
Old 08-22-2007, 10:45 AM   #18
roaster
ill Finger
 
roaster's Avatar
 
Join Date: Jun 2007
Location: toronto
Posts: 219
Hi Guys

The kit is in finally I'm only using 5 PSI for now the car is performing very will.
going to use 5 PSI for next few weeks and eventually raise it up to 6.5 PSI.
I wish I could post photo on the form for every body to see, But I'm not sure how to do that.
roaster is offline   Reply With Quote
Old 08-22-2007, 01:11 PM   #19
Furious
BMW again.
 
Furious's Avatar
 
Join Date: Feb 2002
Location: Toronto
Posts: 6,088
glad to hear.
Furious is offline   Reply With Quote
Old 08-23-2007, 01:48 PM   #20
MarkD
Banned
 
MarkD's Avatar
 
Join Date: Apr 2002
Location: In Your DME!
Posts: 2,414
Quote:
Originally Posted by Autotechnica
Yea, it's not a mickey mouse operation

The dyno alone was like $120,000

Are you sure it was $120K? When I checked 2 years ago, the 2 wheel dynapack was under 45K USD
MarkD is offline   Reply With Quote
Old 08-23-2007, 02:08 PM   #21
PedroBMW
Hooked on Boost
 
PedroBMW's Avatar
 
Join Date: Oct 2005
Location: Windsor, Ontario
Posts: 1,208
Quote:
Originally Posted by MarkD
Are you sure it was $120K? When I checked 2 years ago, the 2 wheel dynapack was under 45K USD
wow, u must have some kind of hookups. At UofW they were trying to get a dynapack for our shop, I think they would have been getting some sort of substantial discount and it still was about that price. I was told that the full price was close too $100k but I honestly never looked into it myself, this is just what I was told by our tech. There are lots of differnt models with different capabilities.
__________________


http://www.foldingtrailers.ca
PedroBMW is offline   Reply With Quote
Old 08-23-2007, 05:52 PM   #22
Autotechnica
BMW Traitor
 
Join Date: Dec 2001
Location: Richmond Hill, Ont
Posts: 4,988
Send a message via MSN to Autotechnica
Quote:
Originally Posted by MarkD
Are you sure it was $120K? When I checked 2 years ago, the 2 wheel dynapack was under 45K USD
You sure about that? If that was true a lot of shops would have it by now. What good shop can't afford 45K?

There are only a couple of shops who have dynapaks in Canada, the reason being they are very expensive. Hell if they were $45K, I would consider buying one myself.

BTW, it's a model 4000. I don't know if mayble some other models don't come with the motec sensors, but this one has wideband AFR's, boost curve, etc etc.
__________________
'02 C32 AMG @ 18psi - Eurocharged custom ECU/TCU, ASP 178mm crank pulley + NW PSK, CM30 i/c pump, NW i/c iso kit, EC i/c, Magnecore wires, NW CAI, SL55 Y pipe, NW ported intake manifolds + gaskets/spacers, NW inconel exhaust manifolds, NW catch can, dual exhaust, H&R sways, H&R coilovers, H&R spacers, Quaife ATB LSD, goodridge lines, EBC yellowstuff, AMG 18" rims, Zeitronix datalogger.


Last edited by Autotechnica; 08-23-2007 at 05:57 PM.
Autotechnica is offline   Reply With Quote
Old 08-23-2007, 06:05 PM   #23
MarkD
Banned
 
MarkD's Avatar
 
Join Date: Apr 2002
Location: In Your DME!
Posts: 2,414
Quote:
Originally Posted by Autotechnica
You sure about that? If that was true a lot of shops would have it by now. What good shop can't afford 45K?

There are only a couple of shops who have dynapaks in Canada, the reason being they are very expensive. Hell if they were $45K, I would consider buying one myself.

BTW, it's a model 4000. I don't know if mayble some other models don't come with the motec sensors, but this one has wideband AFR's, boost curve, etc etc.
I got quotes of around 45K USD for the 2 wheel Dynapack, I can't remember which model it what as it was about 3 or 4 years ago, not 2 as I mentioned.

I still have the brochure Dynapack sent me somewhere here, I'd have to find it. It probably a smaller model. They only had two versions of 2 wheel dyno then.
MarkD is offline   Reply With Quote
Old 08-24-2007, 05:25 PM   #24
PedroBMW
Hooked on Boost
 
PedroBMW's Avatar
 
Join Date: Oct 2005
Location: Windsor, Ontario
Posts: 1,208
they have more than two models now. Must have been a small one for sure.
__________________


http://www.foldingtrailers.ca
PedroBMW is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:44 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.