can someone help me

2002guy · 11-02-2005, 12:20 AM

i was wondering what the difference in the original 2002 head and the 320 head is i am thinking of getting a 320 head and getting it worked to put on my 2002 but im not to sure if i should go that route or just get my current head worked???

your help is much appreciated

SpoolinS6 · 11-02-2005, 12:58 AM

320 head has bigger valves

jm1602 · 11-02-2005, 10:26 PM

That the 320 head will bolt up but you may have piston clearance issues. Also you'll need to deal with the injector holes. Regardless, you'll need to use the cam out of your '02 head because the 320 dizzy spins in the opposite direction.

If you have smoke on deceleration you need valve guides and seals. My advise would be to get the original head referbished with new guides, seals, rockers, springs and seats reground.

Here's a picture of my cylinder head in the process of having the exact repairs list above completed.

paul christians · 11-02-2005, 11:31 PM

That is at M.G.M too...they, are in PORT PERRY, great place and people too. The home of the M1s and CSL...

2002guy · 11-03-2005, 08:14 PM

i am also thinking of getting the head completley worked would i have a problem with that????