Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E46 (1998 - 2005)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-15-2013, 08:03 AM   #1
madonthemike
1st Gear Newbie
 
madonthemike's Avatar
 
Join Date: May 2012
Location: Toronto
Posts: 47
Driver Side Mirror Glass Replacement

Is there any easy way of doing this, what i tried doing was tilt mirror all the way up and put a screw driver below to leverage it out, but it doesnt seem to be coming off - i feel like i might break something if i use excessive force.
madonthemike is offline   Reply With Quote
Old 01-20-2013, 02:48 PM   #2
Amit
2nd Gear Member
 
Join Date: Jul 2005
Location: Toronto
Posts: 50
Try something a bit wider like a 1" putty knife wrapped in tape.
Amit is offline   Reply With Quote
Old 01-20-2013, 05:52 PM   #3
jabela
4th Gear Member
 
Join Date: Apr 2007
Location: Toronto, ON, Canada
Posts: 647
It would be better to do it on a warm day. I'm waiting for a 5'C or better day, so as not to break anything.
__________________

2002 E46 325ci // 5spd // ISC N1 Coilovers
www.modernapothecary.ca
jabela is online now   Reply With Quote
Old 01-03-2014, 01:29 PM   #4
Quickid
3rd Gear Member
 
Join Date: Aug 2006
Location: West End
Posts: 402
Where did you guys buy replacement glass?
Quickid is offline   Reply With Quote
Old 01-03-2014, 02:46 PM   #5
mrod
2nd Gear Member
 
Join Date: Aug 2008
Location: Keswick, ON
Posts: 79
Only pull from the top or bottom or you will break the glass. Also when putting it back on push from the center preferably with a small block or something to even out the pressure.
Breaking a $120 mirror is not fun.
I found ECS tuning was the best price ($120) but there is a guy on kijiji that makes just the glass for like $40. You need to heat the old glass off the carrier.
mrod is offline   Reply With Quote
Old 01-03-2014, 06:58 PM   #6
Quickid
3rd Gear Member
 
Join Date: Aug 2006
Location: West End
Posts: 402
Thanks, I have been looking at ECS Tuning as well. Too bad there is no local place that sells OEM glass outside of the stealers.
Quickid is offline   Reply With Quote
Old 01-06-2014, 06:54 PM   #7
xlr8nbimbo
2nd Gear Member
 
Join Date: Jan 2010
Location: Acton Ontario
Posts: 53
Pelican Parts has it and so does FCP Euro. Much less $$ than the stealership. It's very easy to install. I took off the old cracked mirror by looping a piece of twine around the mirror and giving it a tug - came off really easily. (A screwdriver is not the tool to use!) Reconnect the the wires from the old glass to the replacement glass and press in the new one with your hands. Piece of cake.
xlr8nbimbo is offline   Reply With Quote
Old 01-06-2014, 07:35 PM   #8
windwagen
6th Gear Member
 
windwagen's Avatar
 
Join Date: Jul 2004
Location: Markham
Posts: 1,769
The previous owner of my winter beater installed a stick-on replacement over the original glass. Even the heating still works. The only reason I know about it is that they installed it crooked and I can see the original glass. I don't know where they got it, but the shape is just right....
windwagen is offline   Reply With Quote
Reply

Tags
mirror glass replacement

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:48 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.