Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E36 (1991 - 1999)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-03-2012, 07:55 PM   #1
iverson03tj
5th Gear Member
 
iverson03tj's Avatar
 
Join Date: Oct 2009
Location: Toronto, Ontario, Canada
Posts: 928
mishimoto radiator fitment issue

So i got a the aluminum rad and i tried everything but it just doest fit like the oem rad? the fan shroud doesn't fit properly and the radiator it self sticks out about 1/2 an inch higher than usual... Has anyone else had this problem?
__________________
e39 M5 (s62)- Muffler Delete, Timmay Tips,
e30 325ic - Hard Top, Matte Black
e36 328is - (m52)AA S/c'd, M50 Mani, 3.23 LSD, M3 Brakes, Zimmer rotors, hps pads, Racing Dynamic Strut Bar, Depos, m3 Bumper, Intake, Spal fan, poly RTABs, Eibach Swaybars, Koni yellow, Mishimoto Rad, Silicone hose, Alumi T-housing, Depo w/LED Angels, LED tails, 12' Alpine Type R, Suede head liner, LTW Low rise spoiler
PREVIOUS CARS
92' 325is (m52) - M3 conversion AA S/c'd
'97 Euro Estroil E36 M3 Vert (S50B32)
iverson03tj is offline   Reply With Quote
Old 11-03-2012, 08:08 PM   #2
cormier
6th Gear Member
 
cormier's Avatar
 
Join Date: Feb 2008
Location: Mississauga, ON
Posts: 1,563
Check the bottom mounts and see if the metal lip on the rad is binding anywhere?
__________________

cormier is online now   Reply With Quote
Old 11-03-2012, 09:15 PM   #3
kenmar
3rd Gear Member
 
Join Date: Apr 2005
Location: Toronto
Posts: 334
My first mishi had that problem. I spent more than half an hour using a file to remove excess aluminum so that the shroud fit properly. While you're doing this, it's critical to ensure even clearance around the fan blade perimeter with the shroud, otherwise you're asking for catastrophic failure.

My first mishi lasted 3 years before it sprung the well-known pin hole leaks. Not catastrophic, but a failure nonetheless. My warranty replacement mishi did not have the fan shroud mounting issues but did have another fitment issue: the overflow nipple was soldered on too close to the upper hose nipple. Consequently, I could not put the hoses on because of clearance issues. I wound up using a propane torch to heat it up and bend the overflow nozzle so i could get the friggen hoses on.

These rads are never a direct bolt on!
kenmar is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 01:39 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.