I used some generic sensor, they are all the same, except the plug to the motor, it has to be type installed before catalytic.
Before you buy, you have to check the type of sensor you have on your car. It will either be 3 or 4 wire one...So when buying, you have to ensure you're also buying something with the exact number of wires....
The wire colors are 1 white, 1 black and 1 or 2 grey.
Installation goes as follows:
1) remove your original sensor
2) cut the connectors off both sensors
3) splice the wiring to the corresponding wire colour...greys are interchangeable
4) install new o2 sensor
Here is the link to something that will work, you just need to know the number of wire you have on your application: