Click to go to Forum Home Click to go to maXbimmer Home

Go Back   maXbimmer Forums > maXimum Tech > 3 Series > E30 (1983 - 1991)
User Name
Password


Welcome to Maxbimmer.com!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-27-2009, 04:08 PM   #1
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
A lil bit of TLC - my e30 touring

Thought I'd make a thread to track my progress after seeing Dave's touring.

A little background:

Picked the car up around Sept. 08, had it shipped to me from Montreal and so it began.

Seller said the car was rust free, ran great, only problems are blower not working and passenger window not working.

Car wasn't bad for an 88 and I'd say about 90% rust free, but not 'rust free'. CD had been hacked out of it and I have a new audio harness to fix that. M-Tech kit is decent condition and the brocks are beauts.

Since I'm keeping the car I've decided that I'd like to fix/change/upgrade the following:

Things I've done thus far:
- Patch two rust spots in driver side floor and any surface rust on the underbody - COMPLETE
- Change muffler from cat back - COMPLETE (Installed SS Brullen muffler as I had one on my e46 and loved it. Sounds great)
- Change drivers front fender as it had dent - COMPLETE (sanding and prepping for primer and paint)
- I also changed the gas line from the pump to the engine as I nicked it when cutting out the floor rust...oops

I'm going to start on the rear and work my way forward..

Parts waiting to be installed:
- I've ordered AKG bushings for my rear subframe as I'm planning on pulling it to paint it, so why not. 70A Subframe Mounts, 75D Trailing Arm
- Silicone vaccume lines
- New used checked Alternator
- Air Intake (Might fabricate a true cold air intake..tbd)
- Mint two piece knee bolster

Parts to be sourced still:
- Lowering Springs - either H&R Sport or Race...tbd
- Car currently has Blistein Sports with a very low drop on unknown springs. Need it up a bit.

Pics:

Pic from previous owner



Car getting delivered to my house


Brullen Muffler Installed


New Fender Fitting (Crap BlackBerry pic)


That's about it for now. I'll post some pics as I progress..
lost is offline   Reply With Quote
Old 08-27-2009, 04:22 PM   #2
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Here's some info about my car from decoding the VIN:

Type code AG51
Type 325I (EUR)
Dev. series E30 (5) Line 3
Body type TOUR
Steering LL
Door count 5
Engine M20
Cubical capacity 2.50
Power 141
Transmision HECK
Gearbox MECH
Colour DIAMANTSCHWARZ METALLIC (181)
Upholstery ANTHRAZIT STOFF (0269)
Prod. date 1988-12-17

Order options
No. Description
209 LIMITED SLIP DIFFERENTIAL (25%)
215 POWER STEERING,DEPENDING ON ENGINE SPEED
227 SP/SUSPENSION W SELF-LEVELING SUSPENSION
235 TRAILER-HITCH WITH REMOVABLE HEAD
288 LT/ALY WHEELS
314 HEATED WINDSCREEN WASHER NOZZLES
320 MODEL DESIGNATION, DELETION
401 SLIDING/VENT ROOF, ELECTRIC
410 WINDOW LIFTS, ELECTRIC AT FRONT
413 LUGGAGE COMPARTMENT NET
423 FLOOR MATS, VELOUR
485 RECARO-SITZE FUER FAHRER+BEIFA
498 HEADRESTS IN REAR, MECHANIC. ADJUSTABLE
551 ON-BOARD COMPUTER II W REMOTE CONTROL
570 STRONGER ELECTRICITY SUPPLY
681 DACHANTENNE
708 M-SPORT LEATHER STEERING WHEEL II
lost is offline   Reply With Quote
Old 09-21-2009, 10:20 PM   #3
BabyHerc
2nd Gear Member
 
Join Date: Dec 2008
Location: Newmarket
Posts: 171
Quote:
Originally Posted by lost View Post
Here's some info about my car from decoding the VIN:

Type code AG51
Type 325I (EUR)
Dev. series E30 (5) Line 3
Body type TOUR
Steering LL
Door count 5
Engine M20
Cubical capacity 2.50
Power 141
Transmision HECK
Gearbox MECH
Colour DIAMANTSCHWARZ METALLIC (181)
Upholstery ANTHRAZIT STOFF (0269)
Prod. date 1988-12-17

Order options
No. Description
209 LIMITED SLIP DIFFERENTIAL (25%)
215 POWER STEERING,DEPENDING ON ENGINE SPEED
227 SP/SUSPENSION W SELF-LEVELING SUSPENSION
235 TRAILER-HITCH WITH REMOVABLE HEAD
288 LT/ALY WHEELS
314 HEATED WINDSCREEN WASHER NOZZLES
320 MODEL DESIGNATION, DELETION
401 SLIDING/VENT ROOF, ELECTRIC
410 WINDOW LIFTS, ELECTRIC AT FRONT
413 LUGGAGE COMPARTMENT NET
423 FLOOR MATS, VELOUR
485 RECARO-SITZE FUER FAHRER+BEIFA
498 HEADRESTS IN REAR, MECHANIC. ADJUSTABLE
551 ON-BOARD COMPUTER II W REMOTE CONTROL
570 STRONGER ELECTRICITY SUPPLY
681 DACHANTENNE
708 M-SPORT LEATHER STEERING WHEEL II
Where can I do this for my car?
BabyHerc is offline   Reply With Quote
Old 08-27-2009, 04:31 PM   #4
europrince
6th Gear Member
 
Join Date: Feb 2006
Location: North York
Posts: 6,729
I like
europrince is offline   Reply With Quote
Old 08-31-2009, 10:04 AM   #5
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Got some work done this weekend.

- Disconnected rear brake lines, sway bar, removed rear seat and carpet out of the boot, and started to remove the stock felt on the boot floor.

- Painted up my new alternator also and picked up new belts.

QUESTION: Where do you jack/support the car when you're lifting it to remove th rear subframe? Nothing sticks out to me.

Picture of new jack point on front driver side flower. It's primed/painted/sealed since this pic.



Picture of alternator painted (still taped up):


I'm also going to be ordering a new aftermarket sway bar kit for the front and rear at the end of this week. Any suggestions? I like the color of the ST one and it's reasonable.
lost is offline   Reply With Quote
Old 08-31-2009, 10:09 AM   #6
jeremy
6th Gear Member
 
Join Date: Jul 2002
Location: Toronto
Posts: 9,351
Looking good. There only a few things I don't like about the car....

-smoothed hatch
-interior
-smoothed doors

Change the above and you will have an awesome wagon....don't get me wrong, she is still HOT
jeremy is offline   Reply With Quote
Old 08-31-2009, 10:35 AM   #7
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Thanks. I'm not a huge fan of the smoothed hatch but too much work to rectify this especially without readily available replacement parts.

The interior wasn't my fav at first, I'd rather just black, but it's in mint condition and real leather. I was going to get the seats re-done but it's grown on me and I don't mind it now.
lost is offline   Reply With Quote
Old 08-31-2009, 02:16 PM   #8
davericher20
black and blue
 
davericher20's Avatar
 
Join Date: Dec 2006
Location: 2 storey 3 bedroom 1 car garage
Posts: 3,592
looks good! I kinda like the interior from what I remember in previous posts, can you give us some more interior shots?
I noticed on your VIN list you have the recaro seats too!
__________________


Quote:
Originally Posted by JINT View Post
Some people have serious track experience from the cruise, so what is fast to you, isn't fast to them.
davericher20 is offline   Reply With Quote
Old 09-01-2009, 08:03 AM   #9
lgb240
2nd Gear Member
 
lgb240's Avatar
 
Join Date: Mar 2009
Location: Guelph
Posts: 165
Where did you get the Brullen muffler? I had one built for my E28 about 8 years ago ...it was a work of art and sounded just awasome... tried to look them up to have one made for my E30 Touring, but came up empty.

do tell....

lgb240
lgb240 is offline   Reply With Quote
Old 09-01-2009, 09:20 AM   #10
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Quote:
Originally Posted by lgb240 View Post
Where did you get the Brullen muffler? I had one built for my E28 about 8 years ago ...it was a work of art and sounded just awasome... tried to look them up to have one made for my E30 Touring, but came up empty.

do tell....

lgb240
Unfortunately they closed up shop about 6 or 7 years ago. I searched and searched and found this one on some vw forum forsale about 5 years ago, so I snatched it up as in my opinion best sounding exhaust out there as you have experienced. This was just the muffler and I bent up the exhaust and welded it all up to fit.

Sounds amazing on exceleration but when you're up to speed it's virtualy silent!!

The shop that I got my e46 at has a new cat back for an e36 318 sitting there. I'm honestly thinking about buying one just so I can put the exhaust on it. lol.
lost is offline   Reply With Quote
Old 09-01-2009, 09:37 AM   #11
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Quote:
Originally Posted by davericher20 View Post
looks good! I kinda like the interior from what I remember in previous posts, can you give us some more interior shots?
I noticed on your VIN list you have the recaro seats too!
Don't get me wrong the interior is pretty mint except the headliner which I plan on re-doing as soon as I find the perfect fabric.

Picture of my interior



I saw a pic of the white two door that originated in Windsor with the orange suede and leather interior and have been stuck on it!!

Picture of favorite interior but money can be spent elsewhere
lost is offline   Reply With Quote
Old 09-01-2009, 09:44 AM   #12
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Update 01Sept09:

Put the alternator back in (what a PITA getting the bolt through the bottom), but it's in with new belt. I also changed the power steering belt while I was there. The belts on the car were pretty good but minus well change them.

I also undid the bolts for the rear subframe and the lolipops that attach to the car were also a pain. One of the bolts just snapped and the other took some leverage, but I'll be using new bolts anyways so I was hopeing that they'd all just snap like the first and fall out for me.

QUESTION FOR TOURING OWNERS??: How does the cover that has the barriers for the boot come off?? it has the one that's mesh and goes to the roof and the other covers the cargo area. I'm not sure how to get it out.
lost is offline   Reply With Quote
Old 09-01-2009, 11:35 AM   #13
davericher20
black and blue
 
davericher20's Avatar
 
Join Date: Dec 2006
Location: 2 storey 3 bedroom 1 car garage
Posts: 3,592
Quote:
Originally Posted by lost View Post
Update 01Sept09:
QUESTION FOR TOURING OWNERS??: How does the cover that has the barriers for the boot come off?? it has the one that's mesh and goes to the roof and the other covers the cargo area. I'm not sure how to get it out.
oh man, I was looking for it last month and it looks to me like it's permanent.....I was hoping for a latch or something to remove it but I can see a fat screw on either side (looking from the rear to the front) in the sides where the speakers are in the trunk. Can't get a screwdriver in there though it's really tight and at an angle.

Let me know if you get it out, looked like it was a pita for me so I left it.
__________________


Quote:
Originally Posted by JINT View Post
Some people have serious track experience from the cruise, so what is fast to you, isn't fast to them.
davericher20 is offline   Reply With Quote
Old 09-01-2009, 01:06 PM   #14
lost
2nd Gear Member
 
lost's Avatar
 
Join Date: Feb 2005
Location: Windsor Area
Posts: 285
Quote:
Originally Posted by davericher20 View Post
oh man, I was looking for it last month and it looks to me like it's permanent.....I was hoping for a latch or something to remove it but I can see a fat screw on either side (looking from the rear to the front) in the sides where the speakers are in the trunk. Can't get a screwdriver in there though it's really tight and at an angle.

Let me know if you get it out, looked like it was a pita for me so I left it.
That sux as I need to remove it. lol. Oh well I'll figure something out and report back. the one on my Jeep just pushes in on either side to pop it out, wonder if it might be the same.

Got a call from my wife saying that two deliveries came for me, which I think are my AKG bushings for the rear subframe and trailing arms and my silicone vaccum lines.
lost is offline   Reply With Quote
Old 09-02-2009, 08:57 AM   #15
lgb240
2nd Gear Member
 
lgb240's Avatar
 
Join Date: Mar 2009
Location: Guelph
Posts: 165
Got a call from my wife saying that two deliveries came for me, which I think are my AKG bushings for the rear subframe and trailing arms and my silicone vaccum lines.[/quote]

I put the same AKG bushings on my Touring at the beginning of the summer - I cant stresss tis enough - coat the sh!t out of them with bearing grease before you install. The squeek like crazy .....

Transforms the car handling wise, although I'm comparing them to original warn rubber bits

lgb240
lgb240 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:11 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.