View Single Post
Old 05-20-2013, 10:11 PM   #350
everlast
if I lived . I would be ~
 
everlast's Avatar
 
Join Date: Mar 2004
Location: Ottawa
Posts: 5,847
Oil restrictor is easy.

Go to ottawa fastener, to the metric fine section and find a bolt that threads into your oil inlet port. You'll find that its threaded on the inside for some reason. (Nearly all are.) Usually nothing screws into this as the oil inlet port bolts OUTSIDE it.. so buy a bolt that fits it in the hole, cut it and cut a slot on the face so you can screw it in with a flat head.

Then drill a small hole in it.

Done!
__________________
everlast is offline   Reply With Quote